March Special Limited Time 60% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: 2493360325

Good News !!! HPE6-A69 Aruba Certified Switching Expert Written Exam is now Stable and With Pass Result

HPE6-A69 Practice Exam Questions and Answers

Aruba Certified Switching Expert Written Exam

Last Update 17 hours ago
Total Questions : 60

HPE6-A69 is stable now with all latest exam questions are added 17 hours ago. Just download our Full package and start your journey with HP Aruba Certified Switching Expert Written Exam certification. All these HP HPE6-A69 practice exam questions are real and verified by our Experts in the related industry fields.

HPE6-A69 PDF

HPE6-A69 PDF (Printable)
$48
$119.99

HPE6-A69 Testing Engine

HPE6-A69 PDF (Printable)
$56
$139.99

HPE6-A69 PDF + Testing Engine

HPE6-A69 PDF (Printable)
$70.8
$176.99
Question # 1

You have created an OSPF neighbor configuration with ArubaOS-CX 8320 VSX and a third-party switch The OSPF peering falls. In the event togs you see the following entries.

2020-10-28:03:14 20.371489|hpe-routlng|LOG_WARN|AMM|1/5jOSPFV2|OSPFV2iOSPF 268698624 Packet received with unexpected authentication type 2020-10-28:03:14.20.371503|hpe-routing|LOG_WARN|AMM|1/5|OSPFV2|OSPFV2|Expected authentication type = 0

Which statement is true about the above events?

Options:

A.  

The ArubaOS-CX switch requires plain-text authentication with OSP

F.  

B.  

The third-party switch should be configured with MD5 authentication

C.  

The ArubaOS-CX switch does not expect authentication with OSP

F.  

D.  

The third-party switch should be configured with key chain authentication

Discussion 0
Question # 2

A customer would like to utilize some ArubaOS-CX 6300F switches to perform OSPF routing.

Question # 2

With the ports set up as routed ports, and default parameters for OSPF, which action is the simplest way to allow the fastest communication…

Options:

A.  

Utilize Equal-cost multi-path routing to aggregate more bandwidth on the WAN.

B.  

Set the OSPF cost parameters on every interface on every switch according to the Bandwidth or each link

C.  

No action is required

D.  

Set the OSPF reference bandwidth to 10 or higher

Discussion 0
Question # 3

The rate-limiting QoS feature can be implemented on all ArubaOS-CX platforms However, some features are platform dependent. Which statements are true'' (Select two.)

Options:

A.  

Unknown unicast rate limiting is supported on all ArubaOS-CX platforms

B.  

ICMP-Rate limiting is supported on all ArubaOS-CX platforms.

C.  

Broadcast-rate limiting is supported on all ArubaOS-CX platforms

D.  

Multicast and broadcast rate limits cannot be applied at the same time on the same Interface

Discussion 0
Question # 4

When planning a new wired network solution for an organization, mere are technical goals that must be achieved to support the organization objectives and their applications and services.

Which options are valid technical goals? (Select two.)

Options:

A.  

Reduce the cost of wiring.

B.  

Transform the process of acquisition of a new network solution from a CAPEX to an OPEX model

C.  

improve the network throughput

D.  

Replace hardware that is reaching end of support with a technology refresh.

E.  

Accelerate the ordering process of new network hardware.

Discussion 0
Question # 5

The customer is already using Aruba Gateway and third-party L2 switches New ArubaOS CX 6300 switches have been deployed for R&

D.  

which have a requirement for user profiling and tunneled traffic between ArubaOS CX 6300 and Aruba Gateway

What is required for this configuration to apply QoS user-based rules for the R&D client traffic?

Options:

A.  

Apply a QoS rule to the ArubaCX 6300 client port, lo classify traffic before it is tunneled.

B.  

Apply a port-access policy with QoS defined in the user role on the ArubaOS CX6300 switch

C.  

Manually prioritize IP protocol 47 traffic on the third-party switches to prioritize the tunneled traffic

D.  

Create a QoS policy for the UBT-client-VLAN traffic on the third-party switch.

Discussion 0
Question # 6

Before designing a new network solution for a customer with between 2398 and 5264 employees, you should gamer Information from the customer about their wired network needs.

What are valid questions to determine their wired network needs? (Select two.)

Options:

A.  

How experienced is your networking team?

B.  

What is the current cabling deployed in the location?

C.  

What are the current device capabilities and topology?

D.  

Do you plan to add new customer services?

E.  

How much do you plan to spend in the new wired network?

Discussion 0
Question # 7

A customer with an ArubaOS-CX 6300M switch is having a performance issue on the network and has received complaints about users experiencing intermittent connectivity. After performing troubleshooting it is determined that many of the local websites on the LAN that users are unable to reach are resolved to an invalid MAC address

What are the minimum steps that should be performed to mitigate this condition? (Select two.)

Options:

A.  

implement dhcpv4-shooping.

B.  

Implement ARP ACLs to define trusted MAC address to IP bindings

C.  

Enable 'arp inspection’ on the end-user physical ports

D.  

Enable 'arp inspection untrusted' on the end-user physical ports

E.  

Enable 'arp inspection' on the end-user VLAN

Discussion 0
Question # 8

A customer is migrating from a Cisco VSS system to an ArubaOS-CX VSX cluster in order to provide default gateway functionality, the local network administrator creates VLAN interfaces The network administrator then migrates successfully from Cisco to Aruba

The next day a manager asks if the solution is redundant. The network administrator realizes that there is no redundancy on the default gateway functionality

What is the preferred solution with the least amount of configuration and disturbance?

Options:

A.  

Remove the IP address on every VLAN interface, and replace it with another one in the same subnet Configure active gateway IP with the default gateway address on every VLAN interface on Doth switches

B.  

For every VLAN Interface, configure a VRRP IP address with the same IP address as already present in the first VSX node. Configure this on both switches.

C.  

Remove the IP address on every VLAN interface, and replace it with another one in the same subnet Configure VRRP with the default gateway address as virtual IP-address per VLAN.

D.  

For every VLAN interface, configure an active gateway IP with the same IP address as already present in the first VSX node Configure this on both switches

Discussion 0
Question # 9

With the given topology, the customer Has ArubaOS-CX 6300 switches and Aruba Gateway in use.

Question # 9

What is required for the client traffic to be tunneled as per best practice between the connected switch port and the Aruba Gateway'' (Select two.)

Options:

A.  

IP Protocol 6 should not be blocked on me datapath

B.  

IP Protocol 47 should not be blocked in the data-path

C.  

The ArubaOS-CX switch and Aruba gateway should have an end-to-end MacSec connection

D.  

The ArubaOS-CX switch and Aruba gateway should be EBGP peers.

E.  

Change the default MTU on the data-path between the switch and gateway

Discussion 0
Get HPE6-A69 dumps and pass your exam in 24 hours!

Free Exams Sample Questions