HPE7-A01 Practice Questions
Aruba Certified Campus Access Professional Exam
Last Update 2 days ago
Total Questions : 139
Dive into our fully updated and stable HPE7-A01 practice test platform, featuring all the latest Aruba Certified Professional - Campus Access exam questions added this week. Our preparation tool is more than just a HP study aid; it's a strategic advantage.
Our free Aruba Certified Professional - Campus Access practice questions crafted to reflect the domains and difficulty of the actual exam. The detailed rationales explain the 'why' behind each answer, reinforcing key concepts about HPE7-A01. Use this test to pinpoint which areas you need to focus your study on.
Match the solution components of HPE Aruba Networking Central NetConductor (Options may be used more than once or not at all.)
C:\Users\Waqas Shahid\Desktop\Mudassir\June - July 2025\Untitled.jpgYou are troubleshooting an issue with a pair of Aruba CX 8360 switches configured with VSX Each switch has multiple VRFs. You need to find the IP address of a particular client device with a known MAC address You run the "show arp" command on the primary switch in the pair but do not find a matching entry for the client MAC address.
The client device is connected to an Aruba CX 6100 switch by VSX LA
G.
Which action can be used to find the IP address successfully?
A)
B)
C)
D)
What is used to retrieve data stored in a Management Information Base (MIS)?
With Aruba CX 6300. how do you configure ip address 10 10 10 1 for the interface in default state for interface 1/1/1?
You are deploying a bonded 40 MHz wide channel What is the difference in the noise floor perceived by a client using this bonded channel as compared to an unbonded 20MHz wide channel?
A customer has a site with 200 AP-515 access points 75AP-565 access points installed. The customer is rolling out new mobile phones with Wi-Fi-calling. 802.1X is in use for authentication
What should be enabled to ensure the best roaming experience?
You are are doing tests in your lab and with the following equipment specifications:
• AP1 has a radio that generates a 16 dBm signal.
• AP2 has a radio that generates a 13 dBm signal.
• AP1 has an antenna with a gain of 8 dBi.
• AP2 has an antenna with a gain of 12 dBi. The antenna cable for AP1 has a 4 dB loss. The antenna cable for AP2 has a 3 dB loss.
What would be the calculated Equivalent Isotropic Radiated Power (EIRP) for AP1?
For an Aruba AOS10 AP in mixed mode, which factors can be used to determine the forwarding role assigned to a client? (Select two.)
