300-510 Practice Questions

A.  

20

B.  

1

C.  

infinite

D.  

automatic

A.  

Segment routing must be configured with ISIS.

B.  

Segment routing must be configured with EIGRP.

C.  

Explicit-null must be configured for all neighbors.

D.  

MPLS must be configured.

A.  

Execute the ping utility to generate information about the MAC addresses used along the path

B.  

Verify that MPLS is disabled globally and enabled on the necessary interfaces in a per-interface basis

C.  

Execute the traceroute utility to generate information about the labels used along the path

D.  

Verify that Cisco Express Forwarding has been disabled on the network

A.  

Router 2 receives a Type 5 LSAs from router 1 for its connected subnets

B.  

Router 2 uses router 3 as the next hop for 192.168.0.0/24

C.  

Router 2 uses router 1 as the next hop for 192.168.0.0/24

D.  

Router 2 receives a Type 7 LSAs from router 3 for its connected subnets

A.  

Router 1 has a list of labels used to explicitly lay out a path to router 2.

B.  

Router 1 and router 2 have a bidirectional tunnel set up with dynamic path selection.

C.  

Router 1 is the head-end tunnel and has dynamically chosen a path to router 2.

D.  

Router 2 is the head-end tunnel and has explicitly set a path to router 1.