NSE6_FWF-6.4 Practice Exam Questions and Answers

A.  

Configure a tunnel mode wireless network and enable split tunneling to the local network

B.  

Configure a bridge mode wireless network and enable the Local standalone configuration option

C.  

Configure a bridge mode wireless network and enable the Local authentication configuration option

D.  

Install supported FortiAP and configure a bridge mode wireless network

A.  

When the AP detects any other wireless signal stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.

B.  

When the AP detects PF Interference from an unknown source such as a cordless phone with a signal stronger that -70 dBm, it will increase its transmission power until it reaches the maximum configured TX power limit.

C.  

When the AP detects any wireless client signal weaker than -70 dBm, it will reduce its transmission power until it reaches the maximum configured TX power limit.

D.  

When the AP detects any interference from a trusted neighboring AP stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.

A.  

DHCP

B.  

Static

C.  

Broadcast

D.  

Multicast

A.  

Indicates channels that can be used only when Radio Resource Provisioning is enabled

B.  

Indicates channels that cannot be used because of regulatory channel restrictions

C.  

Indicates channels that will be scanned by the Wireless Intrusion Detection System (WIDS)

D.  

Indicates channels that are subject to dynamic frequency selection (DFS) regulations

A.  

81 Tunnel-Private-Group-ID

B.  

65 Tunnel-Medium-Type

C.  

83 Tunnel-Preference

D.  

58 Egress-VLAN-Name

E.  

64 Tunnel-Type

A.  

Security profiles can only be applied to unencrypted wireless traffic.

B.  

Security profiles can only be applied via firewall policies on the FortiGate.

C.  

Security profiles are only supported on Bridge-mode SSIDs.

D.  

Security profiles on FortiAP devices can use FortiGate subscription to inspect the traffic.

A.  

Provides real-time insight into user movements

B.  

Provides real-time insight into user online activity

C.  

Provides real-time insight into user purchase activity

D.  

Provides real-time insight into user usage stats

A.  

Architectural model

B.  

Predictive model

C.  

Analytical model

D.  

Integration model

A.  

On the AP CLI, using the cw_diag ksta command

B.  

On the controller CLI, using the diag wireless-controller wlac -d sta command

C.  

On the AP CLI, using the cw_diag -d sta command

D.  

On the controller CLI, using the WiFi Client monitor