156-836 Practice Questions

A.  

Monitoring Check Point code drops

B.  

Viewing all interface drops such as RX-ERR, RX-DRP, and RX-OVR

C.  

Viewing all drops by Check Point code or the Gaia OS, such as RX-DRP, RX-ERR, and Gaia OS drops.

D.  

Showing the system temperature in real-time for multiple components, such as CPU, fan, and SSDs.

A.  

Each active connection has two local backups (on the local site) and a third backup connection on the second site (remote site.)

B.  

Each active connection has a backup connection on the second site (remote site.)

C.  

Each active connection has a local backup (on the local site) and a second backup connection on the second site (remote site.)

D.  

Each active connection has a local backup (on the local site) and a second backup connection on each of the MHOs.

A.  

Depends on the type of Appliance

B.  

1% per member

C.  

10% per Security Group with no relation to the number of members

D.  

5% per member

A.  

MHO1 and MHO2 are connected to the SGMs using the Sync cable.

B.  

MHO1 and MHO2 are connected to the line cards in any order administrators see fit.

C.  

MHO 1 is connected to the even-numbered ports, while MHO2 is connected to odd-numbered ports.

D.  

MHO 1 is connected to the odd-numbered ports, while MHO2 is connected to even-numbered ports.

A.  

100%/0%

B.  

33%/66%

C.  

50%/50%

D.  

66%/33%

A.  

orchd restart

B.  

reboot

C.  

service orchestrator restart

D.  

cpstop; cpstart

A.  

Load Sharing cluster

B.  

Active-Active cluster

C.  

Active - Standby cluster

D.  

Hot-Swap RAID

A.  

During the upgrade process all SGMs should be upgraded before upgrading all of the MHOs.

B.  

A minimum of one of the MHOs should be upgraded before starting the SGM upgrades. However, there is no requirement to upgrade all the SGMs during the same maintenancewindow as the MHO

C.  

All MHOs must first be upgraded before starting the SGM upgrades However, there is no requirement to upgrade all the SGMs during the same maintenance window as the MHOs.

D.  

MHOs do not need to be upgraded at all because Maestro supports the use of different versions between the MHOs and SGMs.

A.  

Asg diag used for system diagnostics on Chassis only. It does not exist on Maestro

B.  

Asg diag is used for system backup

C.  

Asg diag is used for system diagnostics

D.  

Asg diag is used for creating traffic flow diagrams

A.  

MHOs process traffic in load sharing mode

B.  

MHOs process traffic in Active-Standby mode

C.  

MHOs process traffic in Active-Active mode

D.  

MHOs process traffic in VSLS mode