300-110 Practice Questions
Designing Cisco Wireless Networks (300-110 WLSD) v1.2
Last Update 4 days ago
Total Questions : 94
Dive into our fully updated and stable 300-110 practice test platform, featuring all the latest CCNP Wireless exam questions added this week. Our preparation tool is more than just a Cisco study aid; it's a strategic advantage.
Our free CCNP Wireless practice questions crafted to reflect the domains and difficulty of the actual exam. The detailed rationales explain the 'why' behind each answer, reinforcing key concepts about 300-110. Use this test to pinpoint which areas you need to focus your study on.
An enterprise is using wireless as the main network connectivity for clients. To ensure wireless network availability, two standalone controllers are installed in the head office. APs are connected to the controllers using a round-robin approach to load balance the traffic. After a power cut, the wireless clients disconnect while roaming. An engineer tried eping from the controller but fails. Which protocol needs to be allowed between the networks that the controllers are installed?
An engineer must identify the network requirements for a company that has a main office and 10 branch offices. The network must be able to support data, voice, video, and location tracking. Which two factors must be considered? (Choose two.)
Which CLI command does an engineer use to validate that the redundancy peer of a Stateful Switchover pair of controllers is up and connected?
A school deploys a Cisco wireless infrastructure in its classrooms to support a high density of mobile devices. The network administrator wants to bond channels in groups of two and only allow APs to send 802.11 management frames at 24 Mbps. What should be included in the design to accomplish this objective?
A customer is migrating from a legacy Cisco AireOS WLC to a new Cisco 9800 IOS XE WLC with Cisco 9100 APs. The new APs must associate to the Catalyst 9800 WLC, and wireless clients must seamlessly roam between the old and new WLCs even during SSO. The new Catalyst 9800 WLC deployment is configured to use SSO. Which command must be added to meet the requirements?
A network engineer is deploying Cisco 9130I APs on multiple Cisco Catalyst 9800-80 WLCs with Cisco Catalyst Center. The engineer must enable Cisco AI Analytics and location analytics to use the RRM features to automatically manage the WLC RF profiles. Which type of license must be used on Cisco Catalyst Center?
A customer is building a new warehouse facility that has only its foundation and perimeter walls built. The building will be complete in the next eight months. The customer needs a detailed bill of materials and costs for a wireless network that must support RF scanners throughout the warehouse. How should the survey be performed?
A network engineer must design a new wireless solution for a company, but the budget can only stretch to include a single Cisco 9800-40 WL
C.
The company requires high availability between the WLC and the core switch in the event of a cable failure. The WLC must dynamically manage port redundancy and perform load balancing between APs transparently. Which design approach must the engineer take to meet the requirements?A customer wants to provide wireless coverage in a parking lot outside of a building. An engineer determines that three APs are required. The APs can be mounted on the light poles in the parking lot because there are cable routes already in place for these locations. The closest wiring closet is approximately 200 meters away. Which setup powers and connects the APs back to the customer network?
A network engineer is designing a new wireless network for a campus. The network must include optimized performance, avoid interference, availability in high-density areas, and roaming. Which two approaches must be taken? (Choose two.)
