300-425 Practice Questions
Designing Cisco Enterprise Wireless Networks (ENWLSD)
Last Update 1 day ago
Total Questions : 286
Dive into our fully updated and stable 300-425 practice test platform, featuring all the latest CCNP Enterprise exam questions added this week. Our preparation tool is more than just a Cisco study aid; it's a strategic advantage.
Our free CCNP Enterprise practice questions crafted to reflect the domains and difficulty of the actual exam. The detailed rationales explain the 'why' behind each answer, reinforcing key concepts about 300-425. Use this test to pinpoint which areas you need to focus your study on.
During a wireless network design, a customer requires wireless coverage on the perimeter of a building but also wants to minimize signal leakage from the wireless network. Which antenna should be used to accomplish this design?
An engineer is performing an active survey of a network that must support different types of mobile devices. The devices must be able to run an application that requires a minimum RF of 73 dBm. Which mobile device must be used for the survey?
An engineer must assess an existing company WLAN to determine the possibility for future IEEE 802.11ac Wave 2 wireless deployment. The existing WLAN is IEEE 802.11a/n and has IEEE 802.11n and 802. 11a clients. The engineer must advise the customer about support for these older clients on the new APs. What happens with client compatibility?
An engineer has deployed Cisco Aironel 3800 Series APs with switches that support B02.i1bz on ex-sting CAT-5e cabling. Which value is the maximum distance supported to achieve up to 5 Gb speed?
What is the minimum recommended RSSI for designing a WLAN to support data applications?
An engineer added an AP to a deployment after a post-installation site survey. The engineer then notices an increase in co-channel interference and retransmissions. Which two features help mitigate the issue? (Choose two.)
Which feature ensures seamless roaming between APs with no noticeable delay for voice clients?
An engineer is designing a solution where guests terminate on an anchor controller in the DMZ. The engineer is having issues and wants to test connectivity between members of a mobility group. Which command must be issued to test whether a mobility control packet is able to be reached over the management interface?
A customer is running a guest WLAN with a foreign/export-anchor setup. There is one anchor WLC in the US and two in Europe. Anchor WLC priorities are used to prefer local anchors. During a routine network audit, it is discovered that a large number of guest client sessions in the US are anchored to the WLCs in Europe. Which
reason explains this behavior?
Refer to the exhibit.
An engineer determined that during a recent controller failure, some APs did not failover to their secondary controller based on the network design, which has sufficient licenses for all APs. The controllers are not in a mobility group but have A records for their hostnames in DNS. Which setting needs to be addressed?
