Free Nokia Virtual Private LAN Services Practice Questions

A.  

VPLS 1 will be displayed as mVPLS and VPLS 100 will be displayed as VPLS.

B.  

VPLS 1 will be displayed as mVPLS and VPLS 100 will be displayed as uVPLS

C.  

VPLS 1 will be displayed as VPLS and VPLS 100 will be displayed as VPLS.

D.  

VPLS 1 will displayed VPLS and VPLS 100 will be displayed as uVPLS.

A.  

The CE must be configured with an MC-LAG to both PE devices.

B.  

The CE must be configured with LACP in active mode.

C.  

There is no configuration required on the C

E.  

D.  

The CE must be an Nokia 7750 SR.

A.  

It depends if traffic is received via R4 or R1 from devices behind R2.

B.  

The devices cannot communicate based on the configuration in the diagram so there will be no mac address association.

C.  

Devices behind R2 will be associated with the sdp between R3 and R1.

D.  

Devices behind R2 will be associated with the sdp between R3 and R4.

A.  

TRUE

B.  

FALSE

A.  

Number of LSPs.

B.  

Number of TLDP sessions.

C.  

Number of SDPs.

D.  

MAC address consumption in the FD

B.  

E.  

Bandwidth and replication requirements.

A.  

The MDU does not need to support MPLS.

B.  

Can be used in ring networks of 4 or more nodes

C.  

Does not require the use of a layer 2 loop prevention protocol such as RSTP

D.  

The MDU does not have to be aware of the active/standby configuration

A.  

VPLS is a bridged LAN service.

B.  

VPLS provides L2 VPN services to CEs.

C.  

VPLS is a point-to-point service where CEs are presented with point-to-point virtual circuits.

D.  

CEs that are members of the same VPLS service instance communicate with each other as if they are connected via a bridged LAN.

A.  

Only R4 will be reachable through the VPLS.

B All devices will be reachable through the VPLS.

B.  

R4 and R3 will remain reachable.

C.  

No devices will be reachable.

A.  

MEP

B.  

MAP

C.  

MIP

D.  

MUP

A.  

RSVP-TE

B.  

SP-VLAN

C.  

QinQ

D.  

Dot1Q