HPE2-T37 Practice Exam Questions and Answers

A.  

There are not sufficient frames for highly available setup.

B.  

Some master modules only support a redundant setup.

C.  

Firmware on the master modules is too low to support highly available setup.

D.  

A dedicated license must be added to HPE OneView to enable this feature.

A.  

As long as the customer has HPE OneVtew Global Dashboard deployed, HPE OneView for VMware vCenter Server does not require any additional licenses.

B.  

One HPE OneView for VMware vCenter Server license is required per HPE Synergy frame if more than 10 Compute Modules are installed in the frame.

C.  

If the number of the HPE Synergy Compute Modules installed in HPE Synergy frame is less than 10, no license is required to use HPE OneView tor VMware vCenter Server.

D.  

As long as the server is managed using HPE OneView. the customer can use HPE OneView for VMware vCenter Server without additional licenses.

A.  

The other networks are not configured with the required Smart Link parameter.

B.  

The other networks are not added to the Logical Interconnect Group configuration.

C.  

The other networks have Private Network' selected, which hides them from Compute Modules.

D.  

The other networks are configured with a purpose other than General or Management.

A.  

The HPE OneView certificate from the primary site must be added to HPE OneView in the remote site.

B.  

The IP address assigned to HPE Composer installed in a remote site must be registered in a primary site.

C.  

Multi-site licenses must be added to HPE OneView and activate for all available HPE Synergy frames.

D.  

Management ports of the remote frame link topology must be connected to the management LAN.

A.  

Once selected in the server profile, the server hardware type cannot be changed, and a server profile can be moved only between the same type of servers

B.  

Server hardware type can be defined only for HPE Synergy and HPE BladeSystem, but it cannot be defined for HPE ProLiant or Apollo systems

C.  

Administrator has to manually define the server hardware type for any unique server architecture and mezzanine card combination

D.  

The server hardware type is automatically created when a server with unique architecture and mezzanine card configuration is added to HPE OneView

A.  

A muiti-enclosure Vrtuai Connect domain can be imported to HPE OneView without disrupting servers

B.  

An HPE server blade can be removed trom HPE OneView by deleting the server from the Server Hardware section

C.  

An HPE server blade cannot be deleted from HPE OneView It must be physically removed from the enclosure

D.  

Both c3000 and C7000 HPE BladeSystems enclosures can be imported to HPE Oneview for monitoring

A.  

2 frames

B.  

4 frames

C.  

3 frames

D.  

1 frame

E.  

5 frames