You are designing a solution for a customer that will support a virtualization workload based on HPE Synergy. Your customer has the following requirements:
Dual-socket HPE Synergy compute nodes running ESXi 8.x with maximum memory supported
Each node should have access to shared storage from HPE Alletra Storage MP B10000
All virtual machines should be protected against host failure
All virtual machines with vGPU must be protected with Fault Tolerance
All compute nodes should boot from drives located in the D3940 Storage Modules protected with RAID 1
All frames should be managed as one logical enclosure to simplify management
All compute nodes should support two network ports with the maximum Ethernet connectivity speed
You are reviewing a proposal that you must verify. The proposal contains:
3 HPE Synergy 12000 frames
2 HPE Synergy Composer2 modules
4 HPE Virtual Connect SE 100Gb F32 Modules for Synergy
4 HPE Synergy 50Gb Interconnect Link Modules
3 HPE Synergy D3940 Storage Modules, each with 20 SSD drives
1152 core vSphere Enterprise Plus subscriptions
36 HPE Synergy 480 Gen11 compute nodes
Each SY480 Gen11 is configured with:
A single Platinum CPU with 32 cores
HPE Synergy 6820C 25/50Gb Converged Network Adapter
HPE Synergy 5830C 32Gb Fibre Channel Host Bus Adapter
HPE MR416i-o Gen11 12G SAS Mezzanine Controller
Which two statements are true regarding the proposal? (Select two.)
You are designing a solution for a customer that will support a virtualization workload based on HPE Synergy. Your customer has the following requirements:
Dual-socket HPE Synergy compute nodes running ESXi 8.x with maximum memory supported
Each node should have access to shared storage from HPE Alletra Storage MP B10000
All virtual machines should be protected against host failure
All virtual machines with vGPU must be protected with Fault Tolerance
All compute nodes should boot from disks located in the D3940 Storage Modules protected with RAID 1
All frames should be managed as one logical enclosure to simplify management
All compute nodes should support two network ports with the maximum Ethernet connectivity speed
You are reviewing a proposal that you must verify. The proposal consists of:
3 x HPE Synergy 12000 frames
2 x HPE Synergy Composer2 modules
4 x HPE Virtual Connect SE 100Gb F32 Modules for Synergy
4 x HPE Synergy 50Gb Interconnect Link Modules
3 x HPE Synergy D3940 Storage Modules, each with 20 SSD drives
1152 core VMware vSphere Enterprise Plus subscriptions
36 x HPE Synergy 480 Gen11 compute nodes
Each SY480 Gen11 is configured with:
A single Platinum CPU with 32 cores
HPE Synergy 6820C 25/50Gb Converged Network Adapter
HPE Synergy 5830C 32Gb Fibre Channel Host Bus Adapter
HPE MR416i-o Gen11 12G SAS Mezzanine Controller
Which two statements are true regarding the proposal? (Select two.)
Your customer has a networking environment based on Aruba CX 8325 switches configured with Quality of Service settings that give higher priority to iSCSI traffic between HPE ProLiant servers and HPE Alletra 6000 storage. They are planning to add HPE Synergy frames with HPE Virtual Connect modules that will connect to the same Aruba infrastructure.
The frames will be deployed in different VLANs. They need to update their environment to provide a lossless fabric for RoCE traffic that will traverse between the HPE Synergy frames and through multiple switches.
Your customer has two sets of Synergy frames in different logical enclosures connected with Aruba CX 8325 switches. They want to update their environment to provide lossless traffic for RoCE traffic.
What is the correct environmental or design change that will meet the customer’s new requirement?
You are designing an HPE solution for SAP HAN
A.
You are considering an as-a-service approach as one of the variants to be proposed to the customer.What is true regarding HPE GreenLake for SAP HANA?
Your customer plans to replace a legacy HPE BladeSystem solution with the HPE Synergy platform.
The customer requirements include:
30 compute nodes to support their virtualization workloads
Redundancy within the management subsystem
An in-frame storage solution to support vSAN
A redundant networking subsystem with the ability to virtualize WWNs
Simplified management with a single logical enclosure
You are reviewing the following proposal:
3 x HPE Synergy 12000 frames
2 x HPE Virtual Connect SE 100Gb F32 Modules for Synergy
4 x HPE Synergy 50Gb Interconnect Link Modules
3 x HPE D3940 Storage Modules with maximum number of drives
6 x HPE Composer2 + 30 x HPE OneView Advanced licenses
30 x SY 480 Gen11 compute modules, each with 2 CPUs and appropriate mezzanine cards
Which statement about this proposal is true to help meet the customer requirements?
