Free Supermicro Direct Liquid Cooling Service Associate (SDLCSA) Exam Practice Questions

A.  

There are 4 screws that need to be loosened, two on each side of the front of the PCIe tray

B.  

There are 6 screws that need to be loosened, three on each side on the front of the PCIe tray

C.  

There are 2 screws that need to be loosened, one on each side on the sides of the GPU tray

D.  

There are 2 screws that need to be loosened, one on each side of the front of the PCIe tray

A.  

6

B.  

4

C.  

10

D.  

8

A.  

It provides air to cool the server

B.  

It boils the liquid and overheats the server

C.  

It circulates the liquid and is placed directly on the chip to improve flow

D.  

It turns the liquid into different colors based on the mood of the server

A.  

GPU card and PCIe card

B.  

AOM-PCIe card and AOC NIC card

C.  

AOM-PCIe card and GPU card

D.  

AOC NIC card and PCIe card

A.  

PCIe Tray

B.  

Motherboard Tray

C.  

Bluetooth

D.  

External Chassis

A.  

Pull the fan board straight up and out of the tray

B.  

Disconnect the power supply from all the fans > Pull up on the blue levers on each side of the fan board to unlock it > Pull the fan board straight up and out of the tray

C.  

Disconnect the power supply from all the fans > Pull the fan board straight up and out of the tray

D.  

Pull up on the blue levers on each side of the fan board to unlock it > Pull the fan board straight up and out of the tray

A.  

The support bar in the middle of the motherboard tray

B.  

The support bar at the front of the motherboard tray

C.  

The support bar at the back of the motherboard tray

D.  

There is no support bar on the motherboard tray that prevents you from removing the air shroud

A.  

Lift the yellow lock to unlock the release lever > Lift the release lever and use it to pull out the failed power supply unit > Replace the failed power supply unit with a new one

B.  

Lift the red lock to unlock the release lever > Lift the release lever and use it to pull out the failed power supply unit > Replace the failed power supply unit with a new one > Ensure the gold connector pins are on the top > Push the new power supply unit into the tray > Push the release lever down and in until it clicks > Ensure the red lock on the release lever is locked

C.  

Lift the blue lock to unlock the release lever > Push the release lever down and in until it clicks > Ensure the red lock on the release lever is locked

D.  

Lift the release lever and use it to pull out the failed power supply unit > Replace the failed power supply unit with a new one > Push the new power supply unit into the tray > Push the release lever down and in until it clicks

A.  

4

B.  

2

C.  

1

D.  

3

A.  

On the metal bar, on the top of the AOM card

B.  

On the metal bar, on the top of the bracket

C.  

On the AOC card itself

D.  

There is no screw that you need to remove