H12-322 Practice Questions

A.  

AP6510DN

B.  

AP8030DN

C.  

AP8130DN

D.  

AT815SN

A.  

True

B.  

False

A.  

32dB

B.  

53dBm

C.  

71dBm

D.  

92dB

A.  

wmm-profile

B.  

radio-profile

C.  

traffic-profile

D.  

service-set

A.  

Turn on 2.4G and 5G dual frequency

B.  

Increase AP transmit power

C.  

Turn on pure N mode

D.  

Turn on the signal threshold access

E.  

Using room divider antenna

A.  

The office surveys the main load-bearing columns and partitions to cover the impact. If it is an overall suspended ceiling, the AP should be considered as close to the maintenance port, if it is metal

Ceiling, you can choose to place the AP under the ceiling or wall mount

B.  

If the wall of the school classroom is made of reinforced concrete, the signal attenuation is large. It is best to measure the attenuation when surveying. The teaching building should pay attention to the weak electricity room.

Set

C.  

The ward inspection scene has high requirements for coverage field strength, roaming effect, and bandwidth requirements. At the same time, it is necessary to pay attention to the interference or disallow of medical equipment.

Area with Wi-Fi signal

D.  

The stadium has a complicated environment and difficult wiring. Therefore, the weak house and the wiring should be confirmed with the property. If the distance is too far, it may be considered.

Adding an external switch, the survey should focus on mutual interference and installation methods between APs.

A.  

True

B.  

False

A.  

Using room divider antenna

B.  

Automatic packet-by-packet power control

C.  

Low speed users limit access

D.  

5G frequency band priority access

E.  

Maximize AP transmit power

A.  

WLAN overlay networking

B.  

Independent management of wired and wireless services

C.  

Wired and wireless traffic convergence and forwarding

D.  

Unified management of wired and wireless users

A.  

True

B.  

Falses