H13-624_V5.5 Practice Questions

A.  

During block service installation, if management nodes are deployed where compute and storage nodes are converged, the number of vCPUs on each converged compute and storage node must be greater than or equal to 20.

B.  

During block service installation, if converged deployment of storage and compute nodes is required, the difference between the disk quantities on any two nodes in the same storage pool cannot be greater than 2 or 30% of the disk quantity on the node having most disks.

C.  

If wizard-based software installation is used, an engineer must manually add nodes, configure networks, and create a control cluster on DeviceManager, and then install the OceanStor Pacific series software.

D.  

To install the Distributed Parallel Client (DPC), the memory required for running the DPC software on a compute node must be greater than or equal to 20 G

B.  

A.  

If upper-layer services require high data security, the engineer needs to set the storage pool type to "Self-encrypting" when creating a converged storage pool.

B.  

Before creating a converged storage pool, the engineer must enable the file service for nodes on DeviceManager.

C.  

When creating a namespace, the engineer needs to select a security style and application type.

D.  

When the storage network is a Remote Direct Memory Access over Converged Ethernet (RoCE) network, the engineer can run the "systemctl stop lldpad.service" command to disable the lldpad service.

A.  

A super administrator can force itself, other super administrators, lightweight directory access protocol (LDAP) users, or LDAP user groups to change their passwords upon the next login.

B.  

After a system is upgraded to support the SmartMulti-Tenant feature, all LUNs, file systems, and ports in the original system are allocated to the internal system vStore "System_vStore."

C.  

To query system role information, the customer can run the "show role system" command.

D.  

In flash storage, only a super administrator can modify vStore information, and the internal system vStore "System_vStore" cannot be modified.

A.  

Analyze network alarms before NE alarms.

B.  

Analyze general alarms before specific alarms.

C.  

Analyze alarms of higher severities before those of lower severities.

D.  

Analyze external factors before internal factors.

A.  

TRUE

B.  

FALSE

A.  

Login policy

B.  

Blocklist and trustlist policies

C.  

User account audit policy

D.  

Account policy

A.  

After a pair is disconnected, if the pair is deleted from the primary or secondary site, which causes configuration inconsistency between the primary and secondary sites, the pair running status changes to "To be recovered."

B.  

When the pair running status is "Split," the pair relationship between the primary and secondary LUNs is interrupted (not manually).

C.  

When the pair running status is "Normal," data synchronization between the primary and secondary LUNs is complete.

D.  

When the pair running status is "To be synchronized," the pair relationship between the primary and secondary LUNs must be manually disconnected to meet the service requirements of a single LUN.

A.  

TRUE

B.  

FALSE

A.  

The main storage disk module is being located.

B.  

The main storage disk module is running properly.

C.  

The main storage disk module is powered off.

D.  

The main storage disk module is faulty or about to fail.