Free Service Provider Professional (JNCIP-SP) Practice Questions

A.  

When the encapsulation is vlan-ccc or extended-vlan-ccc, the configured VLAN tag is not included in the control plane LDP advertisement

B.  

When the encapsulation is ethernet-ccc, only frames without a VLAN tag are accepted in the data plane

C.  

When the encapsulation is vLan-ccc or extended-vlan-ccc, the configured VLAN tag is included in the control plane LDP advertisement

D.  

When the encapsulation is ethemet-ccc, tagged and untagged frames are both accepted in the data plane.

A.  

You can implement BGP GTSM between R2, R3, and R4

B.  

BGP GTSM requires a firewall filter to discard packets with incorrect TTL.

C.  

You can implement BGP GTSM between R2 and R1.

D.  

BGP GTSM requires a TTL of 1 to be configured between neighbors.

E.  

BGP GTSM requires a TTL of 255 to be configured between neighbors.

A.  

RR1 is peered to Client2 and RR2

B.  

RR2 is in an OpenConfirm State until RR1 becomes unreachable.

C.  

Client1 is peered to Client2 and Client3.

D.  

Peering is dynamically discovered between all devices.

A.  

By default on PE-2, the site's local ID is automatically assigned a value of 0 and must be configured to match the total number of attached sites.

B.  

You must create a unique Layer 2 VPN routing instance for each site on the PE-2 device.

C.  

You must use separate physical interfaces to connect PE-2 to each site.

D.  

By default on PE-2, the remote site IDs are automatically assigned based on the order that you add the interfaces to the site configuration.

A.  

RR1 and RR2 must have the same duster ID to exchange routes learned from the client.

B.  

RR1 and RR2 append the duster ID when advertising routes from dient to dient.

C.  

RR1 and RR2 advertise routes learned from the clients to EBGP peers, using itself as the next hop.

D.  

RR1 advertises routes from the client to RR2. using itself as the next hop.

A.  

Configure the multipath parameter under the global BGP configuration.

B.  

Apply the prepend policy as an import policy under group R1.

C.  

Configure the multipath multiple-as parameter under the global BGP configuration.

D.  

Apply the prepend policy as an import policy under group R3.