1Y0-440 Practice Questions

Scenario: A Citrix Architect is asked by management at the Workspacelab organization to review their existing configuration and make the necessary upgrades. The architect recommends small changes to the pre-existing Citrix ADC configuration. Currently, the Citrix ADC MPX devices are configured in a high availability pair, and the outbound traffic is load balanced between two Internet service providers (ISPs). However, the failover is NOT happening correctly. The following requirements were discussed during the design requirement phase:

• The return traffic for a specific flow should be routed through the same path while using Link Load Balancing.

• The link should fail over even if the ISP router is up and intermediary devices to an ISP router are down.

• Traffic going through one ISP router should fail over to the secondary ISP, and the traffic should NOT flow through both routers simultaneously. What should the architect configure to meet this requirement?

A Citrix Architect needs to configure advanced features of NetScaler by using StyleBooks as a resource in the Heat service.

What is the correct sequence of tasks to be completed for configuring NetScaler using the Heat stack?

Scenario: A Citrix Architect has implemented two high availability pairs of MPX 5500 and MPX 11500 devices respectively with 12.0.53.13 nc version. The NetScaler devices are set up to handle NetScaler Gateway, Load Balancing, Application Firewall, and Content Switching. The Workspacelab infrastructure is set up to be monitored with NMAS version 12.0.53.13 nc by the Workspacelab administrators. The Workspacelab team wants to implement one more pair of NetScaler MPX 7500 devices with version 12.0.53.13 nc.

The Citrix consulting team has assigned the task to implement these NetScaler devices in the infrastructure and set them up to be monitored and managed by NMAS.

The following are the requirements that were discussed during the project initiation call:

• NMAS should be configured to get the infrastructure information under sections such as HDX Insight, WEB Insight, and Security Insight.
• Configuration on the new MPX devices should be identical to MPX 11500 devices.
• Configuration changes after the deployment and initial setup should be optimized using NMAS.
• NMAS should be utilized to configure templates that can be utilized by the Workspacelab team in future deployment.
• As per the requirement from the Workspacelab team, NMAS should be store the audited data for only 15 days.

Which process should the architect utilize to ensure that the deployment of MPX 11500 devices are optimized and that it is correct, before deploying the devices in production?

Scenario: The following NetScaler environment requirements were discussed during a design meeting between a Citrix Architect and the Workspacelab team:

• All traffic should be secured, and any traffic coming into HTTP should be redirected to HTTPS.
• Single Sign-on should be created for Microsoft Outlook web access (OWA).
• NetScaler should recognize Uniform Resource Identifier (URI) and close the session to NetScaler when users hit the Logoff button in Microsoft Outlook web access.
• Users should be able to authenticate using user principal name (UPN).
• The Layer 7 monitor should be configured to monitor the Microsoft Outlook web access servers and the monitor probes must be sent on SSL.

Which method can the architect use to redirect the user accessing https://mail.citrix.com to https://mail.citrix.com?

Scenario: A Citrix Architect and a team of Workspacelab members have met for a design discussion about the NetScaler Design Project. They captured the following requirements:

• Two pairs of NetScaler MPX appliances will be deployed in the DMZ network and the internal network.
• High availability will be accessible between the pair of NetScaler MPX appliances in the DMZ network.
• Multi-factor authentication must be configured for the NetScaler Gateway virtual server.
• The NetScaler Gateway virtual server is integrated with XenApp/XenDesktop environment.
• Load balancing must be deployed for the users from the workspacelab.com and vendorlab.com domains.
• The logon page must show the workspacelab logo.
• Certificate verification must be performed to identify and extract the username.
• The client certificate must have UserPrincipalName as a subject.
• All the managed workstations for the workspace users must have a client identifications certificate installed on it.
• The workspacelab users connecting from a managed workstation with a client certificate on it should be authenticated using LDAP.
• The workspacelab users connecting from a workstation without a client certificate should be authenticated using LDAP and RADIUS.
• The vendorlab users should be authenticated using Active Directory Federation Service.
• The user credentials must NOT be shared between workspacelab and vendorlab.
• Single Sign-on must be performed between StoreFront and NetScaler Gateway.
• A domain drop down list must be provided if the user connects to the NetScaler Gateway virtual server externally.
• The domain of the user connecting externally must be identified using the domain selected from the domain drop down list.

On performing the deployment, the architect observes that users are always prompted with two-factor authentication when trying to assess externally from an unmanaged workstation.

Click the exhibit button to view the configuration.

What should the architect do to correct this configuration?

Scenario: A Citrix Architect needs to design a new multi-datacenter Citrix ADC deployment. The customer wants Citrix ADC to provide access the various backend resources by using Global Server Load Balancing (GSLB) in an Active-Active deployment.

Click the Exhibit button to view additional requirements identified by the architect.

Which GSLB algorithm or method should the architect use for the deployment based on the stated requirements?

Scenario: A Citrix Architect has sent the following request to the NetScaler:

Which response would indicate the successful execution of the NITRO command?

Scenario: A Citrix Architect needs to design a new solution within Amazon Web Services (AWS) The architect would like to create a high availability Citrix ADC VPX pair to provide load balancing for applications hosted in the AWS deployment within a single availability zone which will receive traffic arriving from the Internet.

Which configuration should the architect choose to accomplish this?

Scenario: A Citrix Architect needs to design a hybrid Citrix Virtual App and Citrix Virtual Desktop environment which will include as well as resource locations in an on-premises datacenter and Microsoft Azure.

Organizational details and requirements are as follows:

• Active Citrix Virtual App and Citrix Virtual Desktop Service subscription
• No existing Citrix deployment
• Minimization of additional costs
• All users should correct directly to the resource locations containing the servers which will host HDX sessions

Click the Exhibit button to view the conceptual environment architecture.

The architect should use___________ in Location A, and should use _______________ in Location

B.  

What are three potential risks when examining the disaster recovery plan and implementation for a company? (Choose three)