Pre-Summer Sale Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: 65pass65

300-410 Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI) is now Stable and With Pass Result | Test Your Knowledge for Free

Exams4sure Dumps

300-410 Practice Questions

Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI)

Last Update 4 days ago
Total Questions : 642

Dive into our fully updated and stable 300-410 practice test platform, featuring all the latest CCNP Enterprise exam questions added this week. Our preparation tool is more than just a Cisco study aid; it's a strategic advantage.

Our free CCNP Enterprise practice questions crafted to reflect the domains and difficulty of the actual exam. The detailed rationales explain the 'why' behind each answer, reinforcing key concepts about 300-410. Use this test to pinpoint which areas you need to focus your study on.

300-410 PDF

300-410 PDF (Printable)
$54.25
$154.99

300-410 Testing Engine

300-410 PDF (Printable)
$59.5
$169.99

300-410 PDF + Testing Engine

300-410 PDF (Printable)
$74.55
$212.99
Question # 121

Which configuration feature should be used to block rogue router advertisements instead of using the IPv6 Router Advertisement Guard feature?

Options:

A.  

VACL blocking broadcast frames from nonauthorized hosts

B.  

PVLANs with promiscuous ports associated to route advertisements and isolated ports for nodes

C.  

PVLANs with community ports associated to route advertisements and isolated ports for nodes

D.  

IPv4 ACL blocking route advertisements from nonauthorized hosts

Discussion 0
Question # 122

Refer to the exhibit.

Question # 122

A network administrator is using the DNA Assurance Dashboard panel to troubleshoot an OSPF adjacency that failed between Edge_NYC interface GigabitEthernet1/3 with Neighbor Edge_SNJ. The administrator observes that the neighborship is stuck in exstart state. How does the administrator fix this issue?

Options:

A.  

Configure to match the OSPF interface speed and duplex settings on both routers.

B.  

Configure to match the OSPF interface MTU settings on both routers.

C.  

Configure to match the OSPF interface unique IP address and subnet mask on both routers.

D.  

Configure to match the OSPF interface network types on both routers.

Discussion 0
Question # 123

An engineer configured SNMP notifications sent to the management server using authentication and encrypting data with DES. An error in the response PDU is received as " UNKNOWNUSERNAM

E.  

WRONGDIGEST " . Which action resolves the issue?

Options:

A.  

Configure the correct authentication password using SNMPv3 authPriv .

B.  

Configure the correct authentication password using SNMPv3 authNoPriv.

C.  

Configure correct authentication and privacy passwords using SNMPv3 authNoPriv.

D.  

Configure correct authentication and privacy passwords using SNMPv3 authPriv.

Discussion 0
Question # 124

Refer to the exhibit.

Question # 124

Which action resolves the adjacency issue?

Options:

A.  

Match the hello interval timers.

B.  

Configure the same EIGRP process IDs.

C.  

Match the authentication keys.

D.  

Configure the same autonomous system numbers.

Discussion 0
Question # 125

Refer to the exhibit.

Question # 125

A company with autonomous system number AS65401 has obtained IP address block 209.165.200.224/27 fro, ARIN. The company needed more IP addresses and was assigned block209.165.202.128/27 from ISP2. An engineer is ISP1 reports they are receiving ISP2 routes from AS65401. Which configuration onR1 resolves the issue?

A)

Question # 125

B)

Question # 125

C)

Question # 125

D)

Question # 125

Options:

A.  

Option A

B.  

Option B

C.  

Option C

D.  

Option D

Discussion 0
Question # 126

Refer to the exhibit.

Question # 126

The Math and Science departments connect through the corporate. IT router but users in the Math department must not be able to reach the Science department and vice versa Which configuration accomplishes this task?

Options:

A.  

vrf definition Science!interface E 0/2ip address 192.168.1.1 255.255.255.0no shut!interface E 0/3ip address 192.168.2.1 255.255.255.0no shut

B.  

vrf definition Scienceaddress-family ipv4!interface E 0/2ip address 192.168.1.1 255.255.255.0vrf forwarding Scienceno shut!interface E 0/3ip address 192.168.2.1 255.255.255.0vrf forwarding Scienceno shut

C.  

vrf definition Scienceaddress-family ipv4!interface E 0/2ip address 192.168.1.1 255.255.255.0no shut!interface E 0/3ip address 192.168.2.1 255.255.255.0no shut

D.  

vrf definition Scienceaddress-family ipv4!interface E 0/2vrf forwarding Scienceip address 192.168.1.1 255.255.255.0no shut!interface E 0/3vrf forwarding Scienceip address 192.168.2.1

Discussion 0
Question # 127

An engineer needs dynamic routing between two routers and is unable to establish OSPF adjacency. The output of the show ip ospf neighbor command shows that the neighbor state is EXSTART/EXCHANG

E.  

Which action should be taken to resolve this issue?

Options:

A.  

match the passwords

B.  

match the hello timers

C.  

match the MTUs

D.  

match the network types

Discussion 0
Question # 128

Refer to the exhibit.

Question # 128

Which action resolves the failed authentication attempt to the router?

Options:

A.  

Configure aaa authorization login command on line vty 0 4

B.  

Configure aaa authorization login command on line console 0

C.  

Configure aaa authorization console global command

D.  

Configure aaa authorization console command on line vty 0 4

Discussion 0
Question # 129

Refer to the exhibit.

Question # 129

PC-2 failed to establish a Telnet connection to the terminal server. Which configuration resolves the issue?

Question # 129

Options:

A.  

Option A

B.  

Option B

C.  

Option C

D.  

Option D

Discussion 0
Question # 130

Refer to the exhibit.

Question # 130

SanFrancisco and Boston routers are choosing slower links to reach each other despite the direct links being up Which configuration fixes the issue?

Question # 130

Options:

A.  

Option A

B.  

Option B

C.  

Option C

D.  

Option D

Discussion 0
Question # 131

Question # 131

Refer to the exhibit. Which action restores the routes from neighbors while still filtering 1.1.1.0/24?

Options:

A.  

Add a second line in the access list to permit any.

B.  

Modify the route map to permit the access list instead of deny it

C.  

Modify the access list to deny instead of permit it.

D.  

Add a second sequence in the route map permit 20

Discussion 0
Question # 132

Refer to Exhibit.

Question # 132

A network administrator enables DHCP snooping on the Cisco Catalyst 3750-X switch and configures the uplink port (Port-channel2) as a trusted port. Clients are not receiving an IP address, but when DHCP snooping is disabled, clients start receiving IP addresses. Which global command resolves the issue?

Options:

A.  

No ip dhcp snooping information option

B.  

ip dhcp snooping

C.  

ip dhcp relay information trust portchannel2

D.  

ip dhcp snooping trust

Discussion 0
Question # 133

Refer to Exhibit.

Question # 133

A network administrator added one router in the Cisco DNA Center and checked its discovery and health from the Network Health Dashboard. The network administrator observed that the router is still showing up as unmonitored. What must be configured on the router to mount it in the Cisco DNA Center?

Options:

A.  

Configure router with NetFlow data

B.  

Configure router with the telemetry data

C.  

Configure router with routing to reach Cisco DNA Center

D.  

Configure router with SNMPv2c or SNMPv3 traps

Discussion 0
Question # 134

Refer to the exhibit.

Question # 134

When monitoring an IPv6 access list, an engineer notices that the ACL does not have any hits and is causing unnecessary traffic to pass through the interface Which command must be configured to resolve the issue?

Options:

A.  

access-class INTERNET in

B.  

ipv6 traffic-filter INTERNET in

C.  

ipv6 access-class INTERNET in

D.  

ip access-group INTERNET in

Discussion 0
Question # 135

Refer to the exhibit.

Question # 135

To provide reachability to network 10.1.1.0 /24 from R5, the network administrator redistributes EIGRP into OSPF on R3 but notices that R4 is now taking a ........... path through R5 to reach 10.1.1.0/24 network. Which action fixes the issue while keeping the reachability from R5 to 10.1.1.0/24 network?

Options:

A.  

Change the administrative distance of the external EIGRP to 90.

B.  

Apply the outbound distribution list on R5 toward R4 in OSP

F.  

C.  

Change the administrative distance of OSPF to 200 on R5.

D.  

Redistribute OSPF into EIGRP on R4

Discussion 0
Get 300-410 dumps and pass your exam in 24 hours!

Free Exams Sample Questions