350-601 Practice Exam Questions and Answers

A network engineer deploys a cloud service for a customer The customer wants complete control over the underlying operating system data and application Which cloud service model must be used to accomplish this goal?

Refer to the exhibit An engineer must capture fiber channel traffic from the

server and the supervisory to the Cisco MDS 9000 Series Switch Fabric.

The traffic must be forwarded to the analyzer. Drag and drop the

code snippets from the right onto the blanks in the code on the

left to complete the configuration. Not all code snippets are used

Refer to the exhibit. An FCoE-attached storage connects to a Cisco Nexus 9000 Series Switch on interface ethernet1/12. After the configuration was performed. VSAN 200 failed to activate on the vfc interface. Which configuration action must be performed to bring up VSAN 200?

DNS server with IP address 192.168.1.1 is deployed in a data center A network engineer must configure a Cisco UCS Fabric Interconnect to use this DNS. Which configuration should be applied?

Refer to the exhibit. The traffic flow from the storage device fails to communicate with the DB-Pod device. The engineer must configure a monitoring feature to analyze the issue. Drag and drop the configuration snippets from the bottom onto the boxes on the top to deploy the monitoring feature on MDS97K. Not all commands are used. Not all options are used.

Refer to the exhibit. An engineer must create a scheduler task on a Cisco Nexus 9000 Series Switch at 06:00 AM. The task must save the running configuration to a file in the bootflash, then transfer the file from the bootflash to a TFTP server Which command must the scheduler task run after the running configuration is copied to the bootflash?

Refer to the exhibit Leaf3 is configured using distributed anycast gateway for the server connected using VLAN 2021 Drag and drop the configuration commands from the right onto the boxes in the code to deploy the distributed anycast gateway on Leaf 1 .

Refer to the exhibit. The router R1 and N9K1 establish EIGRP neighborship. R1 is advertising network 10.1.1.15/32 to N9K1 and N9K2 and N9K3 are forming the OSPF neighborship over area 1 Which configuration prevents N9K3 from receiving external LSA for network 10.1.1.15/32?

A)

B)

C)

D)

An administrator in UCS Manager must enable its users to reboot and decommission the servers and perform backup jobs Which set of user privileges permits these activities?

A network engineer must determine the cooling requirements for a Cisco UCS C-Series Rack Server. The server with PCIe cards is configured with a fan configuration policy. Which configuration should be used for the fan policy of the server?