Free Implementing Cisco Collaboration Core Technologies (350-801 CLCOR) v2.0 Practice Questions

A.  

It creates a trust relationship with the called party.

B.  

It enables the Use Trusted Relay Point setting from the associated common device configuration.

C.  

It enables Cisco UCM to insert an MTP or transcoder designated as a TRP.

D.  

If TRP is allocated and MTP is also required for the endpoint. calls fail.

A.  

Set the multiple tenant MWI notification to " enabled. "

B.  

Create a separate volcemail profile and set the multiple tenant MWI notification to " true. "

C.  

Create a separate voice service profile and set the multiple tenant MWI notification to true

D.  

Set the multiple tenant MWI notification to " true. "

A.  

Cisco Unified Presence

B.  

Cisco Expressway-

C.  

C.  

Cisco Expressway-E

D.  

Cisco UCM

A.  

encryption in transit

B.  

end-to-end encryption for meetings

C.  

Hybrid Data Security end-to-end

D.  

encryption of content

A.  

Delete the user directly from Cisco UCM.

B.  

Wait 24 hours for the garbage collector to remove the user.

C.  

Restart the Dirsync service after the user is deleted from LDAP directory.

D.  

Execute a manual sync to refresh the local database and delete the end user.

A.  

The NTP server is running out of space in the hard drive, which prevents the cluster service from starting.

B.  

The NTP service is pointing to the wrong publisher.

C.  

The NTP server for Cisco UCM must be stratum 6 or higher.

D.  

The NTP server must be replaced by another server with NTP stratum 1, 2, or 3 running version NTPv4.

A.  

under device profiles in device settings

B.  

in in-service parameters

C.  

under regions using preference lists

D.  

in enterprise parameters

A.  

Video traffic cannot tolerate any packet loss and has a latency of 150 miliseconds

B.  

Video traffic can tolerate up to 10% packet loss and latency of 10 seconds

C.  

Video trafic can tolerate up to 5% packet loss and latency of 5 seconds

D.  

Video traffic can tolerate a packet loss of up to 1% and latency of 150 milliseconds

A.  

The traversal zone on Expressway-c points to Expressway-e through the peer address field on the traversal zone, which specifies the Expressway-e server address. For dual NIC deployments, set the Expressway-e address using an FQDN that resolves the IP address of the internal interface

B.  

The external firewall must allow these inbound connections to Expressway: SIP: TCP 5061; HTTPS: TCP 8443; XMPP TCP 5222; media: UDP 36002 to 59999

C.  

Do not use a shared address for Expressway-e and Expressway-c, as the firewallcannot distinguish between them. If static NAT for IP addressing on Expressway-e is used, ensure that any NAT operation on expressway-c does not resolve the same traffic IP address. Shared NAT IS not supported

D.  

The internal firewall must allow these inbound and outbound connections betweenexpressway - c and Expressway-e :sip;HTTPS(tunneled over SSH between C and

E.  

A.  

The translation rule is not matched because DNIS does not end with a " $ " .

B.  

The translation rule is matched and the translated number is 02553431234.

C.  

The translation rule is matched and the translated number is 025553431234.

D.  

The translation rule is not matched because DNIS contains " - " .