March Special Limited Time 60% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: 2493360325

Good News !!! 350-801 Implementing Cisco Collaboration Core Technologies (350-801 CLCOR) is now Stable and With Pass Result

350-801 Practice Exam Questions and Answers

Implementing Cisco Collaboration Core Technologies (350-801 CLCOR)

Last Update 9 hours ago
Total Questions : 273

350-801 is stable now with all latest exam questions are added 9 hours ago. Just download our Full package and start your journey with Cisco Implementing Cisco Collaboration Core Technologies (350-801 CLCOR) certification. All these Cisco 350-801 practice exam questions are real and verified by our Experts in the related industry fields.

350-801 PDF

350-801 PDF (Printable)
$53.2
$132.99

350-801 Testing Engine

350-801 PDF (Printable)
$58
$144.99

350-801 PDF + Testing Engine

350-801 PDF (Printable)
$72.8
$181.99
Question # 1

Question # 1

Refer to the exhibit. Which outgoing m-line SDP is sent to Cisco UCM after matching the appropriate dial peers via Cisco Unified Border Element?

Options:

A.  

B.  

C.  

D.  

Discussion 0
Question # 2

What are two common attributes of XMPP XML stanzas? (Choase two.)

Options:

A.  

from

B.  

to

C.  

destination

D.  

version

E.  

Source

Discussion 0
Question # 3

A Cisco IP Phone 7841 that is registered to a Cisco Unified Communications Manager with default configuration receives a call setup message. Which codec is negotiated when the SDP offer includes this line of text?

M=audio 498181 RTP/AVP 0 8 97

Options:

A.  

G.  

711ulaw

B.  

iLBC

C.  

G.  

711alaw

D.  

G.  

722

Discussion 0
Question # 4

Which QoS marking is used when an administrator configures voice call signaling?

Options:

A.  

AF41

B.  

CS3

C.  

CS4

D.  

EF

Discussion 0
Question # 5

Refer to the exhibit.

Question # 5

You deploy Mobile and Remote Access for Jabber and discover that Jabber for Windows does not register to cisco Unified Communications Manager while outside of the office. What is a cause of this issue?

Options:

A.  

The DNS record should be created for _ cisco-uds._tcp example.com.

B.  

The DNS record should be changed from _collab-edge._tls example.com.

C.  

The DNS record type should be changed from SRV to

A.  

D.  

Server 4.2.2.2 is not a valid DNS server.

Discussion 0
Question # 6

Refer to the exhibit.

Question # 6

An administrator configures a secure SIP trunk on Cisco UCM.

Which value is needed in the secure certificate subject or subject alternate name field to accomplish this task?

Options:

A.  

The fully qualified domain name of the remote device that is configured on the SIP

trunk.

B.  

The common name of the Cisco UCM CallManager certificate.

C.  

The full qualified domain name of all Cisco UCM nodes that run the CallManager

service.

D.  

The common name of the remote device certificates.

Discussion 0
Question # 7

How does an administrator make a Cisco IP phone display the last 10 digits of the calling number when the call is in the connected state, and also display the calling number in the

E.  

164 format within call history on the phone?

Options:

A.  

Change the service parameter Apply Transformations On Remote Number to True.

B.  

Configure a translation pattern that has a Calling Party Transform Mask of XXXXXXXXXX.

C.  

On the inbound SIP trunk, change Significant Digits to 10.

D.  

Configure a calling party transformation pattern that keeps only the last 10 digits.

Discussion 0
Question # 8

Cisco UCM delays routing of a call during digit analysis with an overlapping dial plan. How long is the default wait time?

Options:

A.  

5 seconds

B.  

10 seconds

C.  

15 seconds

D.  

20 seconds

Discussion 0
Question # 9

Which two steps are required for bulk configuration transactions on the Cisco UCM database utilizing BAT? (Choose two.)

Options:

A.  

A data file in Abstract Syntax Notation One format must be uploaded to Cisco UCM

B.  

A server template must be created in Cisco UCM

C.  

A data file in comma-separated values format must be uploaded to Cisco UCM

D.  

A data file in Extensible Markup Language format must be uploaded to Cisco UCM

E.  

A device template must be created in Cisco UCM

Discussion 0
Question # 10

Question # 10

Refer to the exhibit. A collaboration engineer adds a redundant NTP server to an existing Cisco Collaboration solution On the Cisco UCM OS Administration page, the new NTP server shows as "Not Accessible" Which action resolves this issue?

Options:

A.  

Restart NTPD on the Cisco UCM server.

B.  

Delete and re-add the new NTP server via the Cisco UCM command-line interface

C.  

Start the NTP service on the new NTP server

D.  

Configure the "reach" value as "377" for the new NTP server.

Discussion 0
Question # 11

A user forwards a corporate number to an international number. What are two methods to prevent this forwarded call? (Choose two.)

Options:

A.  

Configure a Forced Authorization Code on the international route pattern.

B.  

Block international dial patterns in the SIP trunk CSS.

C.  

Set Call Forward All CSS to restrict international dial patterns.

D.  

Set the Call Classification to OnNet for the international route pattern.

E.  

Check Route Next Hop By Calling Party Number on the international route pattern.

Discussion 0
Question # 12

On a Cisco Catalyst Switch, which command is required to send CDP packets on a switch port that configures a Cisco IP phone to transmit voice traffic in 802.10 frames, tagged with the voice VLAN ID 221?

Options:

A.  

Device(config-if)# switchport voice vlan 221

B.  

Device(config-if)# switchport vlan voice 221

C.  

Device(config-if)# switchport access vlan 221

D.  

Device(config-if)# switchport trunk allowed vlan 221

Discussion 0
Question # 13

Drag and drop the SNMPv3 message types from the left onto the corresponding definitions on the right.

Question # 13

Options:

Discussion 0
Question # 14

A customer asked to integrate Unity Connection with Cisco UCM using SIP protocol. Which two features must be enabled on SIP security profiles? (Choose two.)

Options:

A.  

accept presence subscription

B.  

allow changing header

C.  

accept unsolicited notification

D.  

enable application-level authorization

E.  

accept replaces header

Discussion 0
Question # 15

An engineer is deploying the Webex app on a Microsoft Windows computer that has multiple user accounts. Which CLI argument allows the engineer to Install the application as a "per machine" Installation?

Options:

A.  

ACCEPT_EULA

B.  

INSTALL ROOT

C.  

ALLUSERS

D.  

FORCELOCKDOVN

Discussion 0
Question # 16

The chief officer at a company must reduce collaboration infrastructure costs by onbording all on-permises equipment to the cloud by using CISCO Webex Control Hub. Administrators need the ability to manage upgrades and set up hot desking for on-premises devices.

Which action must be taken before on boardng devices by using the Control Hub?

Options:

A.  

Configure tie Control Hub organization ID on the devices

B.  

Acquire a license for each device.

C.  

Allow HTTP traffic from each device to Control Hub.

D.  

Upgrade all the devices to software version CE9.15 or later

Discussion 0
Question # 17

Question # 17

Refer to the exhibit. This INVITE is sent to an endpoint that only supports

G.  

729. What must be done for this call to succeed?

Options:

A.  

Add a transcoder that supports

G.  

711ulaw and

G.  

729.

B.  

Nothing; both sides support

G.  

729.

C.  

Add a media termination point that supports

G.  

711ulaw and

G.  

729.

D.  

Nothing both sides support payload type 101.

Discussion 0
Question # 18

A customer reports that the Cisco UCM toll-fraud prevention does not work correctly, and the customer is receiving charges for unapproved international calls as a result. Which two configuration changes resolve the issues? (Choose two.)

Options:

A.  

Mark patterns as off-net or on-net.

B.  

Modify the Block OffNet to OffNet Transfer service parameter.

C.  

Disable call forwarding on the phone.

D.  

Use Cisco Unified Border Element to debug the calls.

E.  

Make the calls route through a firewall.

Discussion 0
Question # 19

A collaboration engineer troubleshoots issues with a Cisco IP Phone 7800 Series. The IPv4 address of the phone is reachable via ICMP and HTTP, and the phone is registered to Cisco UCM However the engineer cannot reach the CU of the phone Which two actions in Cisco UCM resolve the issue? (Choose two)

Options:

A.  

Enable SSH Access under Product Specific Configuration Layout in Cisco UCM

B.  

Disable Web Access under Product Specific Configuration Layout in Cisco UCM

C.  

Set a username and password under Secure Shell information in Cisco UCM

D.  

Enable Settings Access under Product Specific Configuration Layout in Cisco UCM

E.  

Enable FIPS Mode under Product Specific Configuration Layout in Cisco UCM

Discussion 0
Question # 20

Question # 20

Refer to the exhibit. Calls to Cisco Unity Connection are failing across Cisco Unified Border Element when callers try to select a menu prompt Why is this happening and how is it fixed?

Options:

A.  

Cisco Unity Connection is configured on

G.  

729 only. Cisco Unity Connection must be reconfigured to support iLB

C.  

B.  

Cisco Unified Border Element is not sending any support for DTM

F.  

OTMF configuration must be added to the appropriate dial peer.

C.  

Cisco Unified Border Element is sending the incorrect media IP address. The IP address of the loopback interface must be advertised in the SDP

D.  

The Cisco Unity Connection Call Handler is configured for a "Release to Switch" transfer type Transfers must be disabled for the Cisco Unity Connection Call Handler

Discussion 0
Question # 21

An engineer configures a new phone in Cisco UCM The phone boots and gets IP when it connects to the network, however the phone fails to register With CISCO UCM, The engineer observes that the phone has a status Rejected In CISCO UCM

What must be verified first 'Mien troubleshooting the issue?

Options:

A.  

whether auto-registration is enabled in Cisco UCM

B.  

whether the Initial Trust List and Certificate Trust List files on the phone are correct

C.  

whether the phone ts in the correct VLAN

D.  

whether the phone's MAC address is correct In Cisco UCM

Discussion 0
Question # 22

What describes the outcome when the trust boundary is defined at the Cisco IP phone?

Options:

A.  

Packets or Ethernet frames are remarked at the distribution layer switch.

B.  

Packets or Ethernet frames are not remarked at the access layer switch.

C.  

Packets or Ethernet frames are not remarked by the IP phone.

D.  

Packets or Ethernet frames are remarked at the access layer switch.

Discussion 0
Question # 23

What is a description of the DiffServ model used for implementing QoS?

Options:

A.  

AF41 has higher drop precedence than AF42. which has higher drop precedence than AF43.

B.  

Voice and video calls are marked with different DSCP values and placed in different queues.

C.  

AF43 has higher drop precedence than AF42 but lower drop precedence than AF41.

D.  

RTP traffic from voice and video calls is marked EF and placed in the same queue.

Discussion 0
Question # 24

An engineer must enable onboarding of on-premises devices by using activation to a Cisco UCM server The engineer activated the CISCO Device Activation Service and set the default registration method to use the codes. Which action completes the configuration?

Options:

A.  

Set Enable Activation Code enterprise parameter to True-

B.  

Manually provision new phones that have an activation code requirement

C.  

Create a Bulk Administration Tool provisioning template.

D.  

Generate 16-digit codes by using the Bilk Administration Tool

Discussion 0
Question # 25

Which type of input is required when configuring a third-party SIP phone?

Options:

A.  

digest user

B.  

manufacturer

C.  

serial number350-801 2023-4

D.  

authorization code

Discussion 0
Question # 26

Which information is needed to restore the backup of a Cisco UCM publisher successfully?

Options:

A.  

the TFTP server details

B.  

the application credentials for Cisco UCM

C.  

the security password for Cisco UCM

D.  

the FTP server details

Discussion 0
Question # 27

Question # 27

Refer to the exhibit. What is the registration state of the analog port in this debug output?

Options:

A.  

The analog port failed to register to Cisco UCM with an error code 200.

B.  

The MGCP Gateway is not communicating with the Cisco UCM.

C.  

The analog port is currently shut down.

D.  

The analog port is registered to Cisco UCM.

Discussion 0
Question # 28

Which two recommendations are made to optimize Cisco UCM configuration to reduce the number of toll fraud incidents in an organization? (Choose two.)

Options:

A.  

Classify all route patterns as on-net and prohibit on-net to on-net call transfers in Cisco UCM service parameters.

B.  

Classify all route patterns as on-net or off-net and prohibit off-net to off-net call transfers in Cisco UCM service parameters.

C.  

Classify all route patterns as off-net and prohibit off-net to off-net call transfers in Cisco UCM service parameters.

D.  

Inbound CSS on any gateway typically should have access to internal destinations and PSTN destinations.

E.  

Inbound CSS on any gateway typically should have access to internal destinations only and not PSTN destinations.

Discussion 0
Question # 29

Endpoint A is attempting to call endpoint

B.  

Endpoint A only supports

G.  

711ulaw with a packetization rate of 20 ms, and endpoint B supports packetization rate of 30 ms for

G.  

711ulaw. Which two media resources are allocated to normalize packetization rates through transrating? (Choose two.)

Options:

A.  

software MTP on Cisco IOS Software

B.  

software MTP on Cisco UCM

C.  

software transcoder on Cisco UCM

D.  

hardware transcoder on Cisco IOS Software

E.  

hardware MTP on Cisco IOS Software

Discussion 0
Question # 30

Which SNMP service must be activated manually on the Cisco Unified Communications Manager after installation?

Options:

A.  

Cisco CallManager SNMP

B.  

SNMP Master Agent

C.  

Connection SNMP Agent

D.  

Host Resources Agent

Discussion 0
Question # 31

Which Cisco lM and Presence service handles failover and state changes in the cluster?

Options:

A.  

XCP Sync Agent

B.  

Cisco Server Recovery Manager

C.  

Cisco XCP Connection Manager

D.  

XCP router

Discussion 0
Question # 32

Question # 32

Refer to the exhibit. A user takes a phone from San Francisco to New York for a short reassignment. The phone was set up to use the San Francisco device pool, and device mobility is enabled on the Cisco UCM. The user makes a call that matches a route pattern in a route list that contains the Standard Local Route Group. To where does the call retreat?

Options:

A.  

The call fails because device mobility is turned on, and the phone is not configured in New York. The engineer must configure which sites the device should be roaming to.

B.  

The call egresses in San Francisco because the user uses device mobility and is allowed to roam while still keeping the number and resources assigned in San Francisco.

C.  

The call fails because the Standard Local Route Group is being used only it no configuration is set for the device pools.

D.  

The call egresses in New York because the device automatically is assigned a New York device pool and uses the local gateway.

Discussion 0
Question # 33

Question # 33

Refer to the exhibit. An administrator must fix the SRV records to ensure that server1. sample.com is always contacted first from the three servers. Which solution should the engineer apply to resolve this issue?

Options:

A.  

Priority = 100, Weight = 90

B.  

Priority = 10, Weight = 5

C.  

Priority = 10, Weight = 10

D.  

Priority = 5, Weight = 70

Discussion 0
Question # 34

An administrator configures international calling on a Cisco UCM cluster and wants to minimize the number of route patterns that are needed. Which route pattern enables the administrator to match variable-length numbers?

Options:

A.  

9.011#

B.  

9.011@

C.  

9.011!

D.  

9.011*

Discussion 0
Question # 35

How many minutes does it take for automatic fallback to occur in a Presence Redundancy Group if the primary node lost a critical service?

Options:

A.  

5 min

B.  

10 min

C.  

30 min

D.  

60 min

Discussion 0
Question # 36

According to the QoS Baseline Model, drag and drop the applications from the left onto the Per-Hop Behavior values on the right.

Question # 36

Options:

Discussion 0
Question # 37

An engineer implements a new Cisco UCM based telephony system per these requirements.

•The local Ethernet bandwidth is sized based on the total bandwidth per call

•A G 736 codec is used.

•The bit rate is 64 kbps

•The codec sample interval is 10 ms

•The voice payload size is 160 bytes per 20 ms

What should the size of the Ethernet bandwidth be per call?

Options:

A.  

31.2 kbps

B.  

38.4 kbps

C.  

55.2 kbps

D.  

87.2 kbps

Discussion 0
Get 350-801 dumps and pass your exam in 24 hours!

Free Exams Sample Questions