Free Alcatel-Lucent Services Architecture Practice Questions

A.  

1500

B.  

1508

C.  

1514

D.  

1522

A.  

To mirror service requirements of a customer with a single branch office and multiple remote sites

B.  

To utilize unused ports of a service router until they are required for a service.

C.  

To replicate traffic from a service port to another port for debugging or monitoring functions

D.  

To ease the configuration burden of services that support a large number of subscribers

E.  

All of the above

A.  

Route distinguishes are used to ensure that VPRN IP prefixes are globally unique.

B.  

Route distinguishes are appended to IPv4 prefixes to form IPv6 prefixes.

C.  

Route distinguishes are used to determine which routes a VPRN should import.

D.  

CE routes use a route distinguisher to indicate which VPRN they are associated to.

A.  

2

B.  

12

C.  

30

D.  

44

E.  

100

F.  

The VC ID Cannot be determined from the output

A.  

config>service= epipe enable

B.  

config>service~ vpws enable

C.  

config>service= no shutdown

D.  

config>port= no shutdown

E.  

config>service= epipe no shutdown

A.  

TRUE

B.  

FALSE

A.  

The FCS is verified and the customer frame is transported intact over the service provider network.

B.  

The FCS is verified and kept in the customer frame. The VLAN tag is removed for transport over the network.

C.  

The FCS is verified and removed from the frame. The VLAN tag is kept for transport over the network.

D.  

The FCS is verified and removed from the frame. The VLAN tag is removed for transport over the network.

A.  

PE1>config>service>vpm>bgp#info

---------------------------------------------------

group "toCE1"

family ipv6

export "mbgp-bgp"

neighbor 2001:db8:12::1

peer-as 64497

exit

exit

B.  

PE1>config>service>vpm>bgp#info

---------------------------------------------------

group "toCE1"

family ipv6

export "mbgp-bgp"

neighbor 2001:db8:12:1

peer-as 64496

exit

exit

C.  

PE1>config>router>bgp#info

---------------------------------------------------

group "toCEl"

family ipv6

export "mbgp-bgp"

neighbor 2001 db8:12::1

peer-as 64497

exit

exit

D.  

PE1>config>router>bgp#info

---------------------------------------------------

group "toCE1"

family ipv6

export "mbgp-bgp"

neighbor 2001:db8:12::1

peer-as 64496

exit

exit

A.  

sap 1/1/1

B.  

sap 1/1/1:*

C.  

sap 1/1/1:*.0

D.  

sap 1/1/1:0*

E.  

sap 1/1/1:0

A.  

An Epipe that has 2 or more SDPs configured.

B.  

An Epipe that has 3 or more SAPs configured.

C.  

An Epipe that has 2 SAPs on the same node but no SDPs configured

D.  

An Epipe that is configured between two nodes, each having 1 SAP and 1 SDP configured.