5V0-22.23 Practice Questions

To enable vSAN ESA, two requirements that need to be met are: vSAN Standard license or higher, and vSAN ReadyNodes configuration. vSAN Standard license or higher is required to use vSAN ESA, as it is a feature that is only available in vSAN 8.0 or later versions. vSAN ESA is an optional, alternative architecture to vSAN OSA that is designed to process and store data with higher efficiency, scalability, and performance. vSAN ReadyNodes configuration is required to use vSAN ESA, as it is a hardware configuration that is pre-configured, tested, and certified for VMware Hyper-Converged Infrastructure Software. Each vSAN ReadyNode is optimally configured for vSAN ESA with the required amount of CPU, memory, network, and storage NVMe devices. The other options are not correct. vSAN Build Your Own configuration is not supported for vSAN ESA, as it might not meet the hardware requirements or compatibility for vSAN ES

A.  

Adding one more disk group per host with the same configuration and adding an ESXi host with identical device configuration are the two methods that the vSAN administrator should use to meet the goal of increasing capacity and performance with the least amount of impact. Adding one more disk group per host will increase the raw storage capacity by 20% and also improve the performance by distributing the I/O load across more cache devices and disk groups. Adding an ESXi host with identical device configuration will increase the raw storage capacity by 25% and also improve the performance by adding more compute and network resources to the cluster. Both methods can be done without disrupting any ongoing operations or requiring any data evacuation or resynchronization.

The other options are incorrect for the following reasons:

• Replacing all capacity devices with a similar larger device is incorrect because it will not increase the performance and will have a significant impact on the cluster. Replacing the capacity devices requires deleting the disk groups, which will erase all data on them and trigger a resynchronization of the affected objects. This can be disruptive and time-consuming, and also introduce additional network and disk traffic.
• Replacing all cache devices with a larger device is incorrect because it will not increase the capacity and will have a significant impact on the cluster. Replacing the cache devices also requires deleting the disk groups, which will have the same drawbacks as replacing the capacity devices. Moreover, increasing the cache size may not improve the performance significantly, as vSAN OSA uses afixed cache ratio of 70% for write buffer and 30% for read cache, regardless of the cache device size.
• Adding faster cache devices is incorrect because it will not increase the capacity and will have a significant impact on the cluster. Adding faster cache devices also requires deleting the disk groups, which will have the same drawbacks as replacing the cache devices. Furthermore, adding faster cache devices may not improve the performance significantly, as vSAN OSA uses a fixed cache ratio of 70% for write buffer and 30% for read cache, regardless of the cache device speed. References:
• VMware vSAN Specialist v2 Exam Preparation Guide, page 10
• Expanding a vSAN Cluster