HPE0-S60 Practice Questions

A.  

It is by default configured as an untagged network and cannot be a part of a network set.

B.  

It does not support Private VLAN and Multicast VLAN.

C.  

it is not supported with HPE Virtual Connect SE 40 GD F8 Module for HPE Synergy.

D.  

It does not support smart link and private network features.

A.  

HPE OneView offers additional functionalities for HPE Primera like CPG management

B.  

HPE OneView offers limited support tor HPE Primera because of the firmware differences

C.  

To manage HPE Primera using HPE OneView. a dedicated license is required

D.  

Management procedures and features are the same tor both types of the array

A.  

One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM

B.  

vSphere Standard licenses should be replaced with Enterprise Pius licenses to enable requested features

C.  

2 additional HPE Synergy 480 Gen10 Plus compute modules can be added to this setup

D.  

20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drive.

A.  

It supports 2 to 8 sockets in 2-socket increments.

B.  

it cannot be managed using HPE OneView.

C.  

It must be equipped with at least 768 GB of memory.

D.  

It can support up to two nPars with an external RM

C.  

A.  

Powered nPar can be expanded only if HPE Superdome Flex 280 is used

B.  

Online expansion is available only if RMC is used for management.

C.  

HPE Superdome Flex does not support expansion of powered on nPars

D.  

Powered nPar can be expanded if it does not use HPE Persistent Memory

A.  

CPG management

B.  

Volume provisioning

C.  

Cache management

D.  

Replication setup

A.  

All physical interconnects from affected logical interconnects will be placed in a maintenance mode

B.  

All physical interconnects from the affected logical interconnects must he rebooted to activate the new configuration

C.  

All logical interconnects configured using this logical Interconnect group will report inconsistency

D.  

All logical interconnects configured using this logical interconnect group will be automatically updated

A.  

add the rack system to the HPE OneView instance used to manage HPE Synergy to centralize management of all systems.

B.  

connect the rack system to an IPDU and add the IPDU to the HP

E.  

C.  

Deploy HPE OneView Global Dashboard and add the rack systems there, as AMD systems are not directly in HPE OneView.

D.  

Deploy an HPE OneView virtual appliance, and, after configuration, use it to manage only the rack systems.

A.  

The customer must use IL05 to add HPE Superdome Flex systems to HPE OneView

B.  

The customer should deploy an HPE OneView appliance for HPE Superdome Flex management

C.  

The customer must add a second Rack Management Controller for HPE Superdome Flex 280

D.  

The customer has to add HPE Superdome Flex to the HPE OneView used to manage HPE Synergy