NSE5_FMG-7.2 Practice Questions

A.  

After 15 minutes, FortiGate will unset all CLI commands that were part of the installation that caused the tunnel to go down.

B.  

FortiManager will revert and install a previous configuration revision on the managed FortiGate.

C.  

FortiGate will reject the CLI commands that will cause the tunnel to go down.

D.  

FortiManager will not push the CLI commands as a part of the installation that will cause the tunnel to go down.

A.  

Policy ID 2 is installed without a source address

B.  

Policy ID 2 will not be installed

C.  

Policy ID 2 is installed in disabled state

D.  

Policy ID 2 is installed without a source device

A.  

It does not back up firmware images saved on FortiManager.

B.  

It can be configured using the CLI and GUI.

C.  

It backs up all devices and the FortiGuard database.

D.  

It supports FTP, SCP, and SFTP.

A.  

FortiManager will reboot

B.  

FortiManager will send the logging configuration to the managed devices so the managed devices will start sending logs to FortiManager

C.  

FortiManager will enable ADOMs automatically to collect logs from non-FortiGate devices

D.  

FortiManager can be used only as a logging device.

A.  

Policy 3 will be installed on all FortiGate devices and vdom belongs to the ADOM.

B.  

Policy seq.# 3 will be skipped because no installation targets are specified.

C.  

Policy seq.# 3 will be installed on all managed devices and VDOMs that are listed under Installation Targets.

D.  

Policy seq.# 2 will not be installed on the Local-FortiGate root VDOM because there is no root VDOM in the Installation Target.

E.  

Policy seq # 1 will be installed on the Remote-FortiGate root[NAT] and Student[NAT] VDOMs only.

A.  

Specify a gateway address when you create a default SD-WAN static route

B.  

Enable SD-WAN central management in the Training ADOM

C.  

Configure and install the SD-WAN firewall policy and SD-WAN static route before installing the SD-WAN

template settings

D.  

Remove all the interface references such as routes or policies that will be a part of SD-WAN member

interfaces

A.  

You must install these changes using Install Wizard

B.  

FortiGate will auto-update the FortiManager’s device-level database.

C.  

FortiManager will create a new revision history.

D.  

FortiManager provides a preview of CLI commands before executing this script on a managed FortiGate.

A.  

The address object used in policy ID 2 already exist in ADON database with any as interface association and conflicts with address object interface association locally on the FortiGate

B.  

Policy ID 2 is configured from interface any to port6 FortiManager rejects to import this policy because any interface does not exist on FortiManager

C.  

Policy ID 2 does not have ADOM Interface mapping configured on FortiManager

D.  

Policy ID 2 for this managed FortiGate already exists on FortiManager in policy package named Remote-FortiGate.

A.  

Set to workflow and use the ADOM locking feature

B.  

Set to read/write and use the policy locking feature

C.  

Set to normal and use the policy locking feature

D.  

Set to disable and use the policy locking feature

A.  

The setting allows automatic updates to the policy package configuration for a managed device

B.  

The setting enables the ADOMs feature on FortiManager

C.  

This setting allows you to assign different VDOMs from the same FortiGate to different ADOMs.

D.  

The setting disables concurrent ADOM access and adds ADOM locking