Free Nokia NRS II Composite Exam Practice Questions

A.  

A transport tunnel can carry many service tunnels.

B.  

The transport label is unchanged throughout the transport network.

C.  

A single network port can carry more than one transport tunnel.

D.  

Both MPLS and GRE transport tunnels use a service label.

A.  

Option A

B.  

Option B

C.  

Option C

D.  

Option D

A.  

Spoke SDPs prevent loops in a VPLS.

B.  

Mesh SDPs and spoke SDPs can be used in the same VPLS.

C.  

A spoke SDP does not require the routers at both ends to be directly connected.

D.  

A mesh SDP is identical to a spoke SDP except for its flooding behavior.

A.  

The VPN-IPv4 address family.

B.  

The IPv4 address family.

C.  

Either IPv4 or VPN-IPv4 address families can be configured.

D.  

The same address family must be used for the provider network and the PE-C

E.  

A.  

Customer ID and SAP I

D.  

B.  

Customer ID and Service I

D.  

C.  

SAP ID and Service I

D.  

D.  

SDP ID and Service I

D.  

E.  

SDP ID and SAP I

D.  

F.  

SDP ID and VC I

D.  

A.  

Both PE1 and PE2 need a mirror source.

B.  

PE2 needs a mirror source with the remote source specified.

C.  

PE1 needs a mirror source with the remote source specified.

D.  

Both PE1 and PE2 need a mirror destination.

E.  

PE2 needs a mirror destination that specifies a SAP.

A.  

An SDP does not have a path-mtu

B.  

The path-mtu must be set by the administrator.

C.  

By default, the path-mtu is calculated automatically from the network port MTU of the PE router.

D.  

The path-mtu is calculated based on the service MTU of the service using the SDP.

E.  

The path-mtu is signaled between the PE endpoints when the service is established.

A.  

The options field is set to router alert.

B.  

The source address is R1's egress interface address.

C.  

The destination address is R2's ingress interface address.

D.  

The HOP object includes R2's system address.

A.  

The mirror destination configuration on PE5 is missing the "remote-source" command.

B.  

There needs to be a mirror source configuration on PE5 with the "remote-source" command.

C.  

This is not possible since the protocol analyzer is located at the Central Office. It needs to be at the customer site.

D.  

There needs to be a configuration command to put sap 1/1/3 on the mirror destination of PE5.

E.  

There needs to be a configuration command to put sap 1/1/3 on the mirror source of PE5

A.  

PE1>config>router>bgp#info

--------------------------------------------

group "multi-bgp"

family vpn-ipv6

neighbor 10.10.10.2/32

local-address 10.10.10.1

peer-as 64496

exit

exit

B.  

PE1>config>router>bgp#info

-------------------------------------------

group "multi-bgp"

family ipv6 vpn-ipv4

neighbor 10.10.10.2

local-address 10.10.10.1

peer-as 64496

exit

exit

C.  

PE1>config>router>bgp#info

--------------------------------------------

group "multi-bgp"

family vpn-ipv6

neighbor 10.10.10 2

local-address 10.10.10.1

peer-as 64496

exit

exit

D.  

PE1>config>router>bgp#info

--------------------------------------------

group "multi-bgp"

family ipv6 vpn-ipv6

neighbor 10.10.10.2/32

local-address 10.10.10.1

peer-as 64496

exit

exit