Free Nokia NRS II Composite Exam Practice Questions

A.  

7958

B.  

7978

C.  

8022

D.  

8042

A.  

dot1q

B.  

null

C.  

qinq

D.  

atm

E.  

ipcp

F.  

bcp-null

A.  

4078

B.  

4986

C.  

5014

D.  

5022

A.  

SDP

B.  

Network port

C.  

LSP

D.  

Service

E.  

RSVP

A.  

The Ethernet port must be set to network mode, and the service must have a spoke SDP.

B.  

The Ethernet port must be set to network mode.

C.  

The Ethernet port must be set to access mode.

D.  

The Ethernet port must be set to access mode, and the service must have a spoke SDP.

A.  

Yes, A routing policy is required to advertise routes between PE routers in a VPRN regardless of the CE-PE routing.

B.  

Yes, A routing policy is required in this case because BGP is used as the PE-CE routing protocol.

C.  

No, a routing policy is not required. By default, the Alcatel-Lucent 7750 SR will advertise all VPRN routes between PE routers.

D.  

No, a routing policy is not required on PE1, but an import policy is required on PE2.

A.  

Traffic is flooded to all SAPs in the service.

B.  

Traffic is flooded to all SAPs and spoke SDPs in the service.

C.  

Traffic is flooded to all SAPs and mesh SDPs in the service.

D.  

Traffic is flooded to all SAPs, spoke SDPs. and mesh SDPs in the service.

E.  

The traffic is not flooded.

A.  

VPRN is an IP service that connects multiple sites in a single routed domain over the provider-managed IP/MPLS network.

B.  

Each VPRN consists of a set of customer sites that must connect to the same PE router

C.  

In a VPRN service, each customer router becomes a routing peer to other customer routers

D.  

VPRN provides customer routers with transparent IP connectivity without knowledge of the MPLS core

A.  

LDP

B.  

BGP

C.  

MP-BGP

D.  

MPLS

A.  

A SAP can be associated with more than one service.

B.  

A SAP is the subscriber's point of entry to the service network.

C.  

A SAP is created by specifying a physical port and an encapsulation type.

D.  

A SAP can only be created on a port configured as "access".