Free Nokia NRS II Composite Exam Practice Questions

A.  

Intra-Area Prefix LSA

B.  

Inter-Area Prefix LSA

C.  

Inter-Area Router LSA

D.  

AS External LSA

A.  

Label allocation and management.

B.  

Label swapping.

C.  

Pushing a label on an unlabeled packet.

D.  

Label signaling.

E.  

Routing lookups.

A.  

They are explicitly acknowledged by sending a CSNP to the sender identifying the LSP.

B.  

They are implicitly acknowledged as a part of the link-state database synchronization and maintenance procedures.

C.  

They are explicitly acknowledged by sending a PSNP to the sender identifying the LSP.

D.  

They are implicitly acknowledged by the DIS multicast of CSNPs.

A.  

Disable route summarization on router R3

B.  

Enable LDP aggregate prefix match

C.  

Create an import policy to accept these FECs

D.  

Disable LDP exact match on the specified FECs

A.  

Router LSA

B.  

Network LSA

C.  

Intra-Area Prefix LSA

D.  

Link LSA

A.  

Admin groups can be configured using the command "configure>router>mpls>admin-group".

B.  

CSPF uses the information defined by admin groups when paths are computed for constraint-based LSPs.

C.  

By default, interfaces for which MPLS has been enabled are in the default admin group.

D.  

A LSP can make use of admin groups for constraint-based path calculations by including or excluding the admin group

A.  

IS-IS supports VLSM and CIDR.

B.  

IS-IS uses OSI addressing.

C.  

IS-IS supports manual summarization

D.  

IS-IS uses periodic Hello messages.

A.  

AFI

B.  

IDI

C.  

HO-DSP

D.  

NSEL

A.  

The router cannot do a SWAP of this label.

B.  

The label does not match the egress label for the same FE

C.  

C.  

The label is for a FEC for which the next-hop is the peer router

D.  

The label was signaled in error.

A.  

PSNPs are used on point-to-point links to acknowledge the receipt of an LSP.

B.  

There are three types of PSNPs: Level 1, Level 2, and Level 1/2.

C.  

A PSNP lists some of the LSPs in the router's database.

D.  

PSNPs are used by an IS-IS router to request LSP information from a neighboring router.