Exam style questions across every CWDP-305 domain
Last Update 1 day ago
Total Questions : 319
Start with our free CWDP-305 practice questions, carefully crafted to mirror the domains, phrasing, and difficulty of the real CWDP Wi-Fi Design exam. Each CWDP-305 exam question comes with a detailed rationale that explains not just which answer is correct but why the others fall short. That's how concepts stick. Use the free set to benchmark yourself: identify your CWNP weak domains, see where you're losing marks, and build a focused study plan in minutes.
When live video streaming solutions that transmit simultaneously to more than one recipient are used, what special capability should be considered and configured in all affected WLAN implementations?
When conducting a site survey for a possible WLAN redesign, you use two Wi-Fi USB adapters for RSSI data collection and two USB spectrum analysis adapters for RF spectrum data. Since your laptop lacks enough USB ports, you connect them via a 4-port powered USB 3.0 hub. What issue could the use of USB 3.0 cause that might impact your site survey?
Your customer's 802.11n laptops cannot detect the SSID in the 5 GHz band in a conference room, but your 802.11ac laptop connects without issue. What is the most likely explanation for this discrepancy?
During a validation site survey, you realize that the installers mounted some of the APs above the ceiling. They said that this was a request from the building architect due to aesthetics constraints. During the requirements gathering, you weren't advised about any aesthetics constraints from the main stakeholder of the project. What should you do in this case?
After designing and deploying a WLAN infrastructure, you realized the CCI is causing poor performance in the 2.4 GHz band. Primarily, you've designed the WLAN for 5 GHz and 2.4 GHz as a best effort. You found out that the implementers didn't follow your guidelines when configuring the WLAN infrastructure. What can you do to minimize as much as possible the CCI impact in the 2.4 GHz band?
You deployed an AP and installed its antenna, and you now need to set the AP transmit power. Given a desired EIRP of 21 dBm, and an antenna gain of 5.85 dBd connected through 25 feet of cable with a loss specification of 4 dB/100 feet. Assuming that there is no significant loss from the connectors, what should be the transmit power level for this AP?
What power management feature introduced in 802.11ax, but not available in 802.11ac or 802.11n, is designed to improve battery life for WLAN devices?
What kind of antenna results in a nearly circular pattern on the azimuth chart but a very flat donut shape on the elevation chart?
An organization has chosen to implement Wi-Fi 6E and operates in a regulatory domain allowing the use of all 6 GHz channels. Why can 40 MHz channels be used more easily in this network than one operating in the 5 GHz band?
