Exclusive Black Friday Deal: 70% Off All Exam Bundles! Use coupon code below to unlock your savings! - Ends in 0d 00h 00m 00s - Coupon code: Friday70

Free Certified Wireless Design Professional Practice Questions

Question # 61

What is the purpose of defining wall materials in WLAN design software?

Options:

A.  

To ensure the attenuation and reflection of the materials are considered during propagation modeling

B.  

So that the floor plan looks as much like the target deployment space as possible

C.  

It adds color to the floor plan which makes it easier to identify requirement areas

D.  

Managers require it, so WLAN designers should do it

Discussion 0
Question # 62

What happens when you double the channel width (for example, use channel bonding) in a BSS?

Options:

A.  

Higher noise and lower SNR at the receiver

B.  

Lower noise and higher SNR at the receiver

C.  

Lower noise and lower SNR at the receiver

D.  

Higher noise and higher SNR at the receiver

Discussion 0
Question # 63

When deploying long-distance 802.11 bridge links (10 miles / 16 km), what parameter may be critical for improving data flow by reducing retries caused by the long distances?

Options:

A.  

The sequence control field value

B.  

The acknowledgement timeout threshold

C.  

The minimum transmit data rate value

D.  

The CTS-to-self threshold

Discussion 0
Question # 64

While implementing 802.11ax APs in the 6 GHz band, a consultant recommends using WPA2-Personal for VoIP support. Why is this approach technically inappropriate?

Options:

A.  

Because WPA2-Personal causes slower roams than WPA2-Enterprise

B.  

Because 802.11ax does not support WPA2-Personal in any band

C.  

Because 6 GHz WLANs cannot use WPA2-Personal

D.  

Because VoIP requires Opportunistic Wireless Encryption (OWE)

Discussion 0
Question # 65

An associated STA detects a new BSS with the same SSID as the STA's current BSS. The new BSS uses a different IP subnet than the current BSS. If the STA is configured to use 802.1X/EAP preauthentication, what is likely to occur?

Options:

A.  

The STA will not attempt to preauthenticate because the new BSS uses a different IP subnet.

B.  

The STA will attempt to preauthenticate, but fail because the new BSS uses a different data-link broadcast domain.

C.  

The STA will attempt to preauthenticate and succeed if DHCP is supported on the new subnet.

D.  

The STA will attempt to preauthenticate and succeed if IP Mobility is enabled on the AP or WLAN controller.

Discussion 0
Question # 66

Main Topic:Infrastructure Design

Question:

When selecting a centralized WLAN architecture, what new problem may arise when you change the data forwarding model from centralized to distributed?

Options:

A.  

Centralized control functions, such as key management and distribution, RRM, and load balancing will no longer be supported.

B.  

The router between the APs and the controller must be made aware of the APs as forwarding client STAs.

C.  

APs that were designed for a centralized forwarding model may not support all features in distributed forwarding mode.

D.  

All RRM controls will also need to be distributed to a master AP that acts as a channel and transmit power arbiter for other APs in the ESS.

Discussion 0
Question # 67

Which document outlines the objectives, scope, and key stakeholders, serving as the official authorization to begin a WLAN design and deployment project?

Options:

A.  

Bill of Materials

B.  

Project Charter

C.  

Work Breakdown Structure

D.  

Budget

Discussion 0
Question # 68

What are the two most common industry-standard protocols used to transport data from an AP to a Wireless LAN Controller?

Options:

A.  

CAPWAP and GRE

B.  

LWAPP and FTP

C.  

SSL and SSH

D.  

TLS and SSL

Discussion 0
Question # 69

When implementing multiple SSIDs, to what is each SSID typically mapped in order to provide traffic management separately for each SSID?

Options:

A.  

DSCP tags

B.  

Access Category

C.  

802.1p markings

D.  

VLAN

Discussion 0
Question # 70

What roaming technology uses stored keys at the APs for roam back if a client STA returns after having roamed away?

Options:

A.  

SCA roaming

B.  

Preauthentication

C.  

OKC

D.  

PMK caching

Discussion 0

CWDP-305 PDF

CWDP-305 PDF (Printable)
$46.5
$154.99

CWDP-305 Testing Engine

CWDP-305 PDF (Printable)
$51
$169.99

CWDP-305 PDF + Testing Engine

CWDP-305 PDF (Printable)
$63.9
$212.99

Free Exams Sample Questions