Pre-Summer Sale Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: 65pass65

ANS-C01 Amazon AWS Certified Advanced Networking - Specialty is now Stable and With Pass Result | Test Your Knowledge for Free

Exams4sure Dumps

ANS-C01 Practice Questions

Amazon AWS Certified Advanced Networking - Specialty

Last Update 9 hours ago
Total Questions : 288

Dive into our fully updated and stable ANS-C01 practice test platform, featuring all the latest AWS Certified Specialty exam questions added this week. Our preparation tool is more than just a Amazon Web Services study aid; it's a strategic advantage.

Our free AWS Certified Specialty practice questions crafted to reflect the domains and difficulty of the actual exam. The detailed rationales explain the 'why' behind each answer, reinforcing key concepts about ANS-C01. Use this test to pinpoint which areas you need to focus your study on.

ANS-C01 PDF

ANS-C01 PDF (Printable)
$43.75
$124.99

ANS-C01 Testing Engine

ANS-C01 PDF (Printable)
$50.75
$144.99

ANS-C01 PDF + Testing Engine

ANS-C01 PDF (Printable)
$63.7
$181.99
Question # 11

A company needs to transfer data between its VPC and its on-premises data center. The data must travel through a connection that has dedicated bandwidth. The data also must be encrypted in transit. The company has been working with an AWS Partner Network(APN) Partner to establish the connection.

Which combination of steps will meet these requirements? (Choose three.)

Options:

A.  

Request a hosted connection from the APN Partner.

B.  

Request a hosted public VIF from the APN Partner.

C.  

Create an AWS Site-to-Site VPN connection.

D.  

Create an AWS Client VPN connection.

E.  

Create a private VI

F.  

F.  

Create a public VI

F.  

Discussion 0
Question # 12

A company hosts a web application that runs on a fleet of Amazon EC2 instances behind an Application Load Balancer (ALB). The instances are in an Auto Scaling group. The company uses an Amazon CloudFront distribution with the ALB as an origin.

The application recently experienced an attack. In response, the company associated an AWS WAF web ACL with the CloudFront distribution. The company needs to use Amazon Athena to analyze application attacks that AWS WAF detects.

Which solution will meet this requirement?

Options:

A.  

Configure the ALB and the EC2 instance subnets to produce VPC flow logs. Configure the VPC flow logs to deliver logs to an Amazon S3 bucket for log analysis.

B.  

Create a trail in AWS CloudTrail to capture data events. Configure the trail to deliver logs to an Amazon S3 bucket for log analysis.

C.  

Configure the AWS WAF web ACL to deliver logs to an Amazon Kinesis Data Firehose delivery stream. Configure the stream to deliver the data to an Amazon S3 bucket for log analysis.

D.  

Turn on access logging for the AL

B.  

Configure the access logs to deliver the logs to an Amazon S3 bucket for log analysis.

Discussion 0
Question # 13

A company recently started using AWS Client VPN to give its remote users the ability to access resources in multiple peered VPCs and resources in the company's on-premises data center. The Client VPN endpoint route table has a single entry of 0.0.0.0/0. The Client VPN endpoint is using a new security group that has no inbound rules and a single outbound rule that allows all traffic to 0.0.0.0/0.

Multiple users report that web search results are showing remote incorrect geographic location information for the users.

Which combination of steps should a network engineer take to resolve this issue with the LEAST amount of service interruption? (Choose three.)

Options:

A.  

Switch users to AWS Site-to-Site VPNs.

B.  

Enable the split-tunnel option on the Client VPN endpoint.

C.  

Add routes for the peered VPCs and for the on-premises data center to the Client VPN route table.

D.  

Remove the 0.0.0.0/0 outbound rule from the security group that the Client VPN endpoint uses.

E.  

Delete and recreate the Client VPN endpoint in a different VP

C.  

F.  

Remove the 0.0.0.0/0 entry from the Client VPN endpoint route table.

Discussion 0
Question # 14

A company has a data center in the us-west-1 Region with a 10 Gbps AWS Direct Connect dedicated connection to a Direct Connect gateway. There are two private VIFs from the same data center location in us-west-1 that are attached to the same Direct Connect gateway.

VIF 1 advertises 172.16.0.0/16 with an AS PATH attribute value of 65000. VIF 2 advertises 172.16.1.0/24 with an AS PATH attribute value of 65000 65000 65000.

How will AWS route traffic to the data center for traffic that has a destination address within the 172.16.1.0/24 network range?

Options:

A.  

AWS will route all traffic by using VIF 1.

B.  

AWS will route all traffic by using VIF 2.

C.  

AWS will use both VIFs for routing by using a round-robin policy.

D.  

AWS will use flow control to balance the traffic between the two VIFs.

Discussion 0
Question # 15

A company has a public application. The application uses an Application Load Balancer (ALB) that has a target group of Amazon EC2 instances.

The company wants to protect the application from security issues in web requests. The traffic to the application must have end-to-end encryption.

Which solution will meet these requirements?

Options:

A.  

Configure a Network Load Balancer (NLB) that has a target group of the existing EC2 instances. Configure TLS connections to terminate on the EC2 instances that use a public certificate. Configure an AWS WAF web ACL. Associate the web ACL with the NL

B.  

B.  

Configure TLS connections to terminate at the ALB that uses a public certificate. Configure AWS Certificate Manager (ACM) certificates for the communication between the ALB and the EC2 instances. Configure an AWS WAF web ACL. Associate the web ACL with the AL

B.  

C.  

Configure a Network Load Balancer (NLB) that has a target group of the existing EC2 instances. Configure TLS connections to terminate at the EC2 instances by creating a TLS listener. Configure self-signed certificates on the EC2 instances for the communication between the NLB and the EC2 instances. Configure an AWS WAF web ACL. Associate the web ACL with the NL

B.  

D.  

Configure a third-party certificate on the EC2 instances for the communication between the ALB and the EC2 instances. Import the third-party certificate into AWS Certificate Manager (ACM). Associate the imported certificate with the AL

B.  

Configure TLS connections to terminate at the AL

B.  

Configure an AWS WAF web ACL. Associate the web ACL with the AL

B.  

Discussion 0
Question # 16

A company is developing an application in which IoT devices will report measurements to the AWS Cloud. The application will have millions of end users. The company observes that the IoT devices cannot support DNS resolution. The company needs to implement an Amazon EC2 Auto Scaling solution so that the IoT devices can connect to an application endpoint without using DNS.

Which solution will meet these requirements MOST cost-effectively?

Options:

A.  

Use an Application Load Balancer (ALB)-type target group for a Network Load Balancer (NLB). Create an EC2 Auto Scaling group. Attach the Auto Scaling group to the AL

B.  

Set up the IoT devices to connect to the IP addresses of the NL

B.  

B.  

Use an AWS Global Accelerator accelerator with an Application Load Balancer (ALB) endpoint. Create an EC2 Auto Scaling group. Attach the Auto Scaling group to the ALSet up the IoT devices to connect to the IP addresses of the accelerator.

C.  

Use a Network Load Balancer (NLB). Create an EC2 Auto Scaling group. Attach the Auto Scaling group to the NL

B.  

Set up the IoT devices to connect to the IP addresses of the NL

B.  

D.  

Use an AWS Global Accelerator accelerator with a Network Load Balancer (NLB) endpoint. Create an EC2 Auto Scaling group. Attach the Auto Scaling group to the NL

B.  

Set up the IoT devices to connect to the IP addresses of the accelerator.

Discussion 0
Question # 17

A company is using an AWS Site-to-Site VPN connection from the company's on-premises data center to a virtual private gateway in the AWS Cloud Because of congestion, the company is experiencing availability and performance issues as traffic travels across the internet before the traffic reaches AWS. A network engineer must reduce these issues for the connection as quickly as possible with minimum administration effort.

Which solution will meet these requirements?

Options:

A.  

Edit the existing Site-to-Site VPN connection by enabling acceleration. Stop and start the VPN service on the customer gateway for the new setting to take effect.

B.  

Configure a transit gateway in the same AWS Region as the existing virtual private gateway. Create a new accelerated Site-to-Site VPN connection. Connect the new connection to the transit gateway by using a VPN attachment. Update the customer gateway device to use the new Site to Site VPN connection. Delete the existing Site-to-Site VPN connection

C.  

Create a new accelerated Site-to-Site VPN connection. Connect the new Site-to-Site VPN connection to the existing virtual private gateway. Update the customer gateway device to use the new Site-to-Site VPN connection. Delete the existing Site-to-Site VPN connection.

D.  

Create a new AWS Direct Connect connection with a private VIF between the on-premises data center and the AWS Cloud. Update the customer gateway device to use the new Direct Connect connection. Delete the existing Site-to-Site VPN connection.

Discussion 0
Question # 18

A company has agreed to collaborate with a partner for a research project. The company has multiple VPCs in the us-east-1 Region that use CIDR blocks within 10.10.0.0/16. The VPCs are connected by a transit gateway that is named TGW-C in us-east-1. TGW-C has an Autonomous System Number (ASN) configuration value of 64520.

The partner has multiple VPCs in us-east-1 that use CIDR blocks within 172.16.0.0/16. The VPCs are connected by a transit gateway that is named TGW-P in us-east-1. TGW-P has an ASN configuration value of 64530.

A network engineer needs to establish network connectivity between the company's VPCs and the partner's VPCs in us-east-1.

Which solution will meet these requirements with MINIMUM changes to both networks?

Options:

A.  

Create a new VPC in a new account. Deploy a router from AWS Marketplace. Share TGW-C and TGW-P with the new account by using AWS Resource Access Manager (AWS RAM). Associate TGW-C and TGW-P with the new VP

C.  

Configure the router in the new VPC to route between TGW-C and TGW-P.

B.  

Create an IPsec VPN connection between TGW-C and TGW-P. Configure the routing between the transit gateways to use the IPsec VPN connection.

C.  

Configure a cross-account transit gateway peering attachment between TGW-C and TGW-P. Configure the routing between the transit gateways to use the peering attachment.

D.  

Share TGW-C with the partner account by using AWS Resource Access Manager (AWS RAM). Associate the partner VPCs with TGW-

C.  

Configure routing in the partner VPCs and TGW-

C.  

Discussion 0
Question # 19

A company has a hybrid environment that connects an on-premises data center to the AWS Cloud. The hybrid environment uses a 10 Gbps AWS Direct Connect dedicated connection. The Direct Connect connection has multiple private VIFs that terminate in multiple VPCs.

To comply with regulations, the company must encrypt all WAN traffic, regardless of the underlying transport. The company needs to implement an encryption solution that will not affect the company's bandwidth capacity.

Which solution will meet these requirements?

Options:

A.  

Create a public VI

F.  

Configure a new AWS Site-to-Site VPN connection to use the new public VI

F.  

B.  

Configure MAC security (MACsec) support on the port of the existing Direct Connect connection. Change the encryption mode to must_encrypt.

C.  

Configure a new Direct Connect connection that supports MAC security (MACSec) Associate the existing VIFs to the new Direct Connect connection.

D.  

Create a public VI

F.  

Configure a new private IP VPN that uses the Direct Connect connection.

Discussion 0
Question # 20

A company wants to improve visibility into its AWS environment. The AWS environment consists of multiple VPCs that are connected to a transit gateway. The transit gateway connects to an on-premises data center through an AWS Direct Connect gateway and a pair of redundant Direct Connect connections that use transit VIFs. The company must receive notification each time a new route is advertised to AWS from on premises over Direct Connect.

What should a network engineer do to meet these requirements?

Options:

A.  

Enable Amazon CloudWatch metrics on Direct Connect to track the received routes. Configure a CloudWatch alarm to send notifications when routes change.

B.  

Onboard Transit Gateway Network Manager to Amazon CloudWatch Logs Insights. Use Amazon EventBridge (Amazon CloudWatch Events) to send notifications when routes change.

C.  

Configure an AWS Lambda function to periodically check the routes on the Direct Connect gateway and to send notifications when routes change.

D.  

Enable Amazon CloudWatch Logs on the transit VIFs to track the received routes. Create a metric filter Set an alarm on the filter to send notifications when routes change.

Discussion 0
Get ANS-C01 dumps and pass your exam in 24 hours!

Free Exams Sample Questions