Pre-Summer Sale Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: 65pass65

ANS-C01 Amazon AWS Certified Advanced Networking - Specialty is now Stable and With Pass Result | Test Your Knowledge for Free

Exams4sure Dumps

ANS-C01 Practice Questions

Amazon AWS Certified Advanced Networking - Specialty

Last Update 9 hours ago
Total Questions : 288

Dive into our fully updated and stable ANS-C01 practice test platform, featuring all the latest AWS Certified Specialty exam questions added this week. Our preparation tool is more than just a Amazon Web Services study aid; it's a strategic advantage.

Our free AWS Certified Specialty practice questions crafted to reflect the domains and difficulty of the actual exam. The detailed rationales explain the 'why' behind each answer, reinforcing key concepts about ANS-C01. Use this test to pinpoint which areas you need to focus your study on.

ANS-C01 PDF

ANS-C01 PDF (Printable)
$43.75
$124.99

ANS-C01 Testing Engine

ANS-C01 PDF (Printable)
$50.75
$144.99

ANS-C01 PDF + Testing Engine

ANS-C01 PDF (Printable)
$63.7
$181.99
Question # 51

A company has two teams: Team A and Team

B.  

Team A has VPCs that run in Account

A.  

The team uses a transit gateway (TGW-A) to route traffic between workloads that run in the different VPCs. Similarly, Team В has VPCs that run in Account

B.  

Team В uses a different transit gateway (TGW-B) to route traffic between workloads that run in the different VPCs.

The company's network team manages the routing for Team A and Team В. The network team wants to retire TGW-B and use a single transit gateway to manage routing for the VPCs of both teams.

Which solution will meet this requirement with the LEAST operational overhead?

Options:

A.  

Create a resource share for TGW-A Share TGW-A with Account

B.  

Create VPC attachments for the VPCs in Account В. Configure routing for the VPCs in TGW-A route tables. Update the route tables of the VPCs in Account В to forward traffic to TGW-

A.  

Delete TGW-B attachments and TGW-

B.  

B.  

Create a resource share for TGW-

A.  

Share TGW-A with Account В. Replicate the TGW-B configuration to TGW-A to automatically start routing changes for the VPCs in Account В. Delete TGW-B when routing changes are complete.

C.  

Create a new transit gateway (TGW-C) in Account

A.  

Create a resource share for TGW-

C.  

Share TGW-C with Account

B.  

Create VPC attachments for the VPCs in Account A and Account В. Configure routing for all the VPCs in TGW-C route tables. Update the routetables for the VPCs in Account A and Account В to forward traffic to TGW-

C.  

Delete TGW-A attachments and TGW-B attachments. Delete TGW-A and TGW-

B.  

D.  

Create a new transit gateway (TGW-C) in a new account (Account C). Create a resource share for TGW-

C.  

Share TGW-C with Account A and Account

B.  

Create VPC attachments for the VPCs in Account A and Account В. Configure routing for all the VPCs in TGW-C route tables. Update the route tables for the VPCs in Account A and Account В to forward traffic to TGW-

C.  

Delete TGW-A attachments and TGW-B attachments. Delete TGW-A and TGW-

B.  

Discussion 0
Question # 52

A company is using a shared services VPC with two domain controllers. The domain controllers are deployed in the company's private subnets. The company is deploying a new application into a new VPC in the account. The application will be deployed onto an Amazon EC2 for Windows Server instance in the new VP

C.  

The instance must join the existing Windows domain that is supported by the domain controllers in the shared services VP

C.  

A transit gateway is attached to both the shared services VPC and the new VP

C.  

The company has updated the route tables for the transit gateway, the shared services VPC, and the new VP

C.  

The security groups for the domain controllers and the instance are updated and allow traffic only on the ports that are necessary for domain operations. The instance is unable to join the domain that is hosted on the domain controllers.

Which combination of actions will help identify the cause of this issue with the LEAST operational overhead? (Choose two.)

Options:

A.  

Use AWS Network Manager to perform a route analysis for the transit gateway network. Specify the existing EC2 instance as the source. Specify the first domain controller as the destination. Repeat the route analysis for the second domain controller.\

B.  

Use port mirroring with the existing EC2 instance as the source and another EC2 instance as the target to obtain packet captures of the connection attempts.

C.  

Review the VPC flow logs on the shared services VPC and the new VP

C.  

D.  

Issue a ping command from one of the domain controllers to the existing EC2 instance.

E.  

Ensure that route propagation is turned off on the shared services VP

C.  

Discussion 0
Question # 53

A company wants to analyze TCP traffic to the internet. The traffic originates from Amazon EC2 instances in the company's VP

C.  

The EC2 instances initiate connections through a NAT gateway. The required information includes source and destination IP addresses, ports, and the first 8 bytes of payload of TCP segments. The company needs to collect, store, and analyze all the required data points.

Which solution will meet these requirements?

Options:

A.  

Set up the EC2 instances as VPC traffic mirror sources. Deploy software on the traffic mirror target to forward the data to Amazon CloudWatch Logs. Analyze the data by usingCloudWatch Logs Insights.

B.  

Set up the NAT gateway as a VPC traffic mirror source. Deploy software on the traffic mirror target to forward the data to an Amazon OpenSearch Service cluster. Analyze the data by using OpenSearch Dashboards.

C.  

Turn on VPC Flow Logs on the EC2 instances. Specify the default format and a log destination of Amazon CloudWatch Logs. Analyze the flow log data by using CloudWatch Logs Insights.

D.  

Turn on VPC Flow Logs on the EC2 instances. Specify a custom format and a log destination of Amazon S3. Analyze the flow log data by using Amazon Athena.

Discussion 0
Question # 54

A company uses a hybrid architecture and has an AWS Direct Connect connection between its on-premises data center and AWS. The company has production applications that run in the on-premises data center. The company also has production applications that run in a VP

C.  

The applications that run in the on-premises data center need to communicate with the applications that run in the VP

C.  

The company is using corp.example.com as the domain name for the on-premises resources and is using an Amazon Route 53 private hosted zone for aws.example.com to host the VPC resources.

The company is using an open-source recursive DNS resolver in a VPC subnet and is using a DNS resolver in the on-premises data center. The company's on-premises DNS resolver has a forwarder that directs requests for the aws.example.com domain name to the DNS resolver in the VP

C.  

The DNS resolver in the VPC has a forwarder that directs requests for the corp.example.com domain name to the DNS resolver in the on-premises data center. The company has deckled to replace the open-source recursive DNS resolver with Amazon Route 53 Resolver endpoints.

Which combination of steps should a network engineer take to make this replacement? (Choose three.)

Options:

A.  

Create a Route 53 Resolver rule to forward aws.example.com domain queries to the IP addresses of the outbound endpoint.

B.  

Configure the on-premises DNS resolver to forward aws.example.com domain queries to the IP addresses of the inbound endpoint.

C.  

Create a Route 53 Resolver inbound endpoint and a Route 53 Resolver outbound endpoint.

D.  

Create a Route 53 Resolver rule to forward aws.example.com domain queries to the IP addresses of the inbound endpoint.

E.  

Create a Route 53 Resolver rule to forward corp.example.com domain queries to the IP address of the on-premises DNS resolver.

F.  

Configure the on-premises DNS resolver to forward aws.example.com queries to the IP addresses of the outbound endpoint.

Discussion 0
Question # 55

A company uses transit gateways to route traffic between the company's VPCs. Each transit gateway has a single route table. Each route table contains attachments and routes for the VPCs that are in the same AWS Region as the transit gateway. The route tables in each VPC also contain routes to all the other VPC CIDR ranges that are available through the transit gateways. Some VPCs route to local NAT gateways.

The company plans to add many new VPCs soon. A network engineer needs a solution to add new VPC CIDR ranges to the route tables in each VP

C.  

Which solution will meet these requirements in the MOST operationally efficient way?

Options:

A.  

Create a new customer-managed prefix list. Add all VPC CIDR ranges to the new prefix list. Update the route tables in each VPC to use the new prefix list ID as the destination and the appropriate transit gateway ID as the target.

B.  

Turn on default route table propagation for the transit gateway route tables. Turn on route propagation for each route table in each VP

C.  

C.  

Update the route tables in each VPC to use 0.0.0.010 as the destination and the appropriate transit gateway ID as the target.

D.  

Turn on default route table association for the transit gateway route tables. Turn on route propagation for each route table in each VP

C.  

Discussion 0
Question # 56

A company is migrating its internet VPN connections to dedicated AWS Direct Connect connections. The company needs to set up the Direct Connect connections so that all network communications are encrypted in transit.

Which combination of steps will meet this requirement? (Choose three.)

Options:

A.  

Create new Direct Connect connections while requesting MACsec ports.

B.  

Create a MACsec Connectivity Association Key Name (CKN) and Connectivity Association Key (CAK) pair. Associate the pair with each new connection.

C.  

Update the on-premises routers to use MACsec and the shared Connectivity Association Key Name (CKN) and Connectivity Association Key (CAK) pair.

D.  

Create a shared key for an IPsec connection.

E.  

Configure a new Direct Connect gateway. Associate the shared key with the new Direct Connect gateway.

F.  

Set up IPsec on the on-premises router. Associate the shared key with the IPsec configuration.

Discussion 0
Question # 57

A company has critical VPC workloads that connect to an on-premises data center through two redundant active-passive AWS Direct Connect connections. However, a recent outage on one Direct Connect connection revealed that it takes more than a minute for traffic to fail over to the secondary Direct Connect connection. The company wants to reduce the failover time from minutes to seconds.

Which solution will provide the LARGEST reduction in the BGP failover time?

Options:

A.  

Reduce the BGP hold-down timer that is configured on the BGP sessions on the Direct Connect connection VIFs.

B.  

Configure an Amazon CloudWatch alarm for the Direct Connect connection state to invoke an AWS Lambda function to fail over the traffic.

C.  

Configure Bidirectional Forwarding Detection (BFD) on the Direct Connect connections on the AWS side.

D.  

Configure Bidirectional Forwarding Detection (BFD) on the Direct Connect connections on the on-premises router.

Discussion 0
Question # 58

A company is deploying an application. The application is implemented in a series of containers in an Amazon Elastic Container Service (Amazon ECS) cluster. The company will use the Fargate launch type for its tasks. The containers will run workloads that require connectivity initiated over an SSL connection. Traffic must be able to flow to the application from other AWS accounts over private connectivity. The application must scale in a manageable way as more consumers use the application.

Which solution will meet these requirements?

Options:

A.  

Choose a Gateway Load Balancer (GLB) as the type of load balancer for the ECS service. Create a lifecycle hook to add new tasks to the target group from Amazon ECS as required to handle scaling. Specify the GLB in the service definition. Create a VPC peer for external AWS accounts. Update the route tables so that the AWS accounts can reach the GL

B.  

B.  

Choose an Application Load Balancer (ALB) as the type of load balancer for the ECS service. Create path-based routing rules to allow the application to target the containers that are registered in the target group. Specify the ALB in the service definition. Create a VPC endpoint service for the ALB Share the VPC endpoint service with other AWS accounts.

C.  

Choose an Application Load Balancer (ALB) as the type of load balancer for the ECS service. Create path-based routing rules to allow the application to target the containers that are registered in the target group. Specify the ALB in the service definition. Create a VPC peer for the external AWS accounts. Update the route tables so that the AWS accounts can reach the AL

B.  

D.  

Choose a Network Load Balancer (NLB) as the type of load balancer for the ECS service. Specify the NLB in the service definition. Create a VPC endpoint service for the NL

B.  

Share the VPC endpoint service with other AWS accounts.

Discussion 0
Question # 59

An IoT company sells hardware sensor modules that periodically send out temperature, humidity, pressure, and location data through the MQTT messaging protocol. The hardware sensor modules send this data to the company's on-premises MQTT brokers that run on Linux servers behind a load balancer. The hardware sensor modules have been hardcoded with public IP addresses to reach the brokers.

The company is growing and is acquiring customers across the world. The existing solution can no longer scale and is introducing additional latency because of the company's global presence. As a result, the company decides to migrate its entire infrastructure from on premises to the AWS Cloud.The company needs to migrate without reconfiguring the hardware sensor modules that are already deployed across the world. The solution also must minimize latency.

The company migrates the MQTT brokers to run on Amazon EC2 instances.

What should the company do next to meet these requirements?

Options:

A.  

Place the EC2 instances behind a Network Load Balancer (NLB). Configure TCP listeners. Use Bring Your Own IP (BYOIP) from the on-premises network with the NL

B.  

B.  

Place the EC2 instances behind a Network Load Balancer (NLB). Configure TCP listeners. Create an AWS Global Accelerator accelerator in front of the NLUse Bring Your Own IP (BYOIP) from the on-premises network with Global Accelerator.

C.  

Place the EC2 instances behind an Application Load Balancer (ALB). Configure TCP listeners. Create an AWS Global Accelerator accelerator in front of the AL

B.  

Use Bring Your Own IP (BYOIP) from the on-premises network with Global Accelerator

D.  

Place the EC2 instances behind an Amazon CloudFront distribution. Use Bring Your Own IP (BYOIP) from the on-premises network with CloudFront.

Discussion 0
Question # 60

A media company is implementing a news website for a global audience. The website uses Amazon CloudFront as its content delivery network. The backend runs on Amazon EC2 Windows instances behind an Application Load Balancer (ALB). The instances are part of an Auto Scaling group. The company's customers access the website by using service example com as the CloudFront custom domain name. The CloudFront origin points to an ALB that uses service-alb.example.com as the domain name.

The company’s security policy requires the traffic to be encrypted in transit at all times between the users and the backend.

Which combination of changes must the company make to meet this security requirement? (Choose three.)

Options:

A.  

Create a self-signed certificate for service.example.com. Import the certificate into AWS Certificate Manager (ACM). Configure CloudFront to use this imported SSL/TLS certificate. Change the default behavior to redirect HTTP to HTTPS.

B.  

Create a certificate for service.example.com by using AWS Certificate Manager (ACM). Configure CloudFront to use this custom SSL/TLS certificate. Change the default behavior to redirect HTTP to HTTPS.

C.  

Create a certificate with any domain name by using AWS Certificate Manager (ACM) for the EC2 instances. Configure the backend to use this certificate for its HTTPS listener. Specify the instance target type during the creation of a new target group that uses the HTTPS protocol for its targets. Attach the existing Auto Scaling group to this new target group.

D.  

Create a public certificate from a third-party certificate provider with any domain name for the EC2 instances. Configure the backend to use this certificate for its HTTPS listener. Specify the instance target type during the creation of a new target group that uses the HTTPS protocol for its targets. Attach the existing Auto Scaling group to this new target group.

E.  

Create a certificate for service-alb.example.com by using AWS Certificate Manager (ACM). Onthe ALB add a new HTTPS listener that uses the new target group and the service-alb.example.com ACM certificate. Modify the CloudFront origin to use the HTTPS protocol only. Delete the HTTP listener on the AL

B.  

F.  

Create a self-signed certificate for service-alb.example.com. Import the certificate into AWS Certificate Manager (ACM). On the ALB add a new HTTPS listener that uses the new target group and the imported service-alb.example.com ACM certificate. Modify the CloudFront origin to use the HTTPS protocol only. Delete the HTTP listener on the AL

B.  

Discussion 0
Get ANS-C01 dumps and pass your exam in 24 hours!

Free Exams Sample Questions