C_TS414_2023 Practice Questions

For an inspection lot to be created for an outbound delivery item (e.g., inspection type 10):

An Inspection Lot Origin is Assigned to a Delivery Type in Customizing (B): In Customizing (SPRO > QM > Quality Inspection > Inspection Lot Creation > Maintain Inspection Lot Origins and Assign Inspection Types), the delivery type (e.g., LF for outbound) must be linked to an inspection lot origin (e.g., 10). This ensures the system triggers a lot during delivery creation (VL01N).

The Relevant Inspection Type is Active in the Material (C): Inspection type 10 must be activated in the material master’s QM view (transaction MM01/MM02) for the plant, enabling QM for outbound deliveries.

QM is Active in the Relevant Movement Type (A): Movement types (e.g., 601 for goods issue) trigger stock postings, not inspection lots directly in outbound scenarios.

QM is Active in the Quality Info Record: SD (D): The quality info record: SD (transaction QVDM) defines inspection requirements but isn’t a prerequisite for lot creation; it refines the process.

Thus, "B" and "C" are the correct answers.References: SAP Help Portal - "Inspection Lots for Deliveries"; SAP S/4HANA QM Customizing Guide - "Inspection Lot Origins".

For a "Complaint Against Supplier" notification (e.g., type Q2, transaction QM01):

Material Document (B): Material documents (e.g., goods receipt via MIGO) are standard references, linking the complaint to a specific receipt event (SPRO > QM > Quality Notifications > Notification Creation).

Purchasing Document (C): Purchase orders (e.g., from ME21N) are commonly referenced to tie the complaint to the supplier’s delivery or order.

WBS Element (A): Work Breakdown Structure elements are PS-related, not standard for supplier complaints.

QM Order (D): QM orders track costs but aren’t reference documents for notification creation.

Thus, "Material document" and "Purchasing document" are the correct answers.References: SAP Help Portal - "Reference Documents for Supplier Complaints"; SAP S/4HANA QM User Guide - "Notification Creation".

Activity recording (e.g., time or cost) for inspection lots of origin 01 (Goods Receipt) requires:

Inspection Operations with Work Centers (B): Operations in the inspection plan (transaction QP01) must have work centers assigned, as these link to activity types (e.g., labor) for recording effort or costs during inspection (SPRO > QM > Quality Planning > Inspection Planning).

Inspection Lot with a QM Order (D): A QM order (e.g., created via Customizing or lot assignment) is required to capture activity data (e.g., via transaction QE51N or CO11N), linking costs to the inspection lot (SPRO > QM > Quality Inspection > Inspection Lot Creation > Define Inspection Types).

Inspection Specifications with Master Inspection Characteristics (A): MICs define what’s inspected but aren’t prerequisites for activity recording.

Inspection Specifications with Inspection Methods (C): Methods guide execution, not activity recording setup.

Thus, "Inspection operations with work centers" and "Inspection lot with a QM order" are the correct answers.References: SAP Help Portal - "Activity Recording in QM"; SAP S/4HANA QM User Guide - "Cost Management".

Sample-drawing items in the sample-drawing procedure (transaction QPV2) specify:

Number of Samples (B): Defines how many samples (e.g., 5 units) are drawn per item, a key field in the item details.

Sample Categories (D): Specifies the type (e.g., primary, reserve, pooled) for each sample-drawing item, a mandatory attribute.

Confirmation of Sample Drawing (A): Confirmation occurs in sample management (e.g., QPR2), not stored in the procedure item.

Sample Drawing Based on Number of Containers (C): This is a rule in the procedure header, not an item-specific detail.

Thus, "Number of samples" and "Sample categories" are the correct answers.References: SAP Help Portal - "Sample-Drawing Procedure"; SAP S/4HANA QM User Guide - "Sample Management".

Valuation modes in SAP QM (defined in the sampling procedure, transaction QDV1) determine how quantitative characteristics are evaluated:

Manual Valuation (B): Allows manual acceptance/rejection of quantitative results (e.g., based on measured values), a standard option for flexibility.

Attributive Inspection Number of Defects (D): Used for quantitative characteristics when counting defects (e.g., scratches), treating it as an attribute-like valuation for nonconformities.

Mean Value Within Tolerance Range (E): The system valuates based on whether the mean of recorded values falls within tolerances, a common quantitative mode.

Attributive Inspection Nonconforming Units (A): Specific to qualitative attributes, not quantitative measurements.

Valuation According to Characteristic Attribute Code (C): Applies to qualitative characteristics with predefined codes, not quantitative ones.

Thus, "Manual valuation," "Attributive inspection number of defects," and "Mean value within tolerance range" are the correct answers.References: SAP Help Portal - "Valuation Modes in QM"; SAP S/4HANA QM User Guide - "Sampling Procedures".

Defects recording for inspection lots (e.g., transaction QE51N) requires specific Customizing:

Assign a Notification Type to an Inspection Type (A): In Customizing (SPRO > QM > Quality Inspection > Inspection Lot Creation > Maintain Inspection Types), linking a notification type (e.g., Q3) to an inspection type (e.g., 01) enables automatic or manual notification creation for defects, a mandatory step for integration.

Define the Report Type (D): The report type (SPRO > QM > Quality Inspection > Defects Recording > Define Report Types) must be defined to determine the defect recording layout and process, a required setting.

Activate the Workflow Template (B): Workflow is optional for notifications, not mandatory for defect recording.

Activate Reference to Existing Notifications (C): This is an optional enhancement, not a requirement.

Thus, "Assign a notification type to an inspection type" and "Define the report type" are the correct answers.References: SAP Help Portal - "Defects Recording Customizing"; SAP S/4HANA QM Customizing Guide - "Inspection Types".

Creating a new inspection type in SAP QM (SPRO > QM > Quality Inspection > Inspection Lot Creation > Maintain Inspection Types) requires:

Assign a Task List Type to the New Inspection Type (A): The inspection type (e.g., custom Z01) must be linked to a task list type (e.g., Q for inspection plans) to define the inspection scope, a mandatory step.

Assign the New Inspection Type to a Predefined Inspection Lot Origin (C): The type must be assigned to an inspection lot origin (e.g., 01 for GR) to determine when lots are created, a required configuration.

Assign the New Inspection Type to a Number Range (B): Number ranges are assigned to origins, not directly to types, so this is optional.

Define Default Values for the New Inspection Type (D): Defaults (e.g., UD settings) are optional enhancements, not mandatory.

Thus, "Assign a task list type to the new inspection type" and "Assign the new inspection type to a predefined inspection lot origin" are the correct answers.References: SAP Help Portal - "Customizing Inspection Types"; SAP S/4HANA QM Customizing Guide - "Inspection Lot Creation".

Defects recording in SAP QM (e.g., transaction QE51N) during production inspections uses specific elements to define its layout and behavior:

Report Type (A): Defined in Customizing (SPRO > QM > Quality Inspection > Defects Recording > Define Report Types), the report type determines the structure and fields available for defect entry (e.g., simplified or detailed layout).

Confirmation Profile (C): This governs how defects are confirmed or structured during recording, especially in production-integrated scenarios (e.g., operation confirmation), influencing the defect entry screen.

Catalog Profile (D): Assigned to the material or inspection type, the catalog profile (transaction QPCD) specifies the code groups and codes available for defect classification, shaping the recording layout.

Partner Profile (B): Used in EDI or external integrations, not for defect recording layout in QM.

Status Profile (E): Manages statuses (e.g., of notifications), not the defect recording interface.

Thus, "Report type," "Confirmation profile," and "Catalog profile" are the correct answers.References: SAP Help Portal - "Defects Recording in QM"; SAP S/4HANA QM User Guide - "Inspection Results".

In SAP S/4HANA QM, the action box in quality notifications (e.g., transaction QM02) triggersfollow-up actions, which can be documented as:

As Task (C): Activities from the action box (e.g., "Send email") can be created as tasks in the notification’s task tab, using catalog type 2 (Tasks). This is a standard option for actionable steps (SPRO > QM > Quality Notifications > Define Action Box).

As Activity (D): Activities can be logged in the activities tab (catalog type 8) to record completed actions (e.g., "Email sent"), documenting the execution of the action box entry.

As Cause (A): Causes (catalog type 5) describe why an issue occurred, not action box outcomes.

As Item (B): Items detail defects or problems, not action documentation.

Thus, "As task" and "As activity" are the correct answers.References: SAP Help Portal - "Action Box in Quality Notifications"; SAP S/4HANA QM User Guide - "Notification Processing".