CWDP-304 Practice Questions
Certified Wireless Design Professional
Last Update 4 days ago
Total Questions : 281
Dive into our fully updated and stable CWDP-304 practice test platform, featuring all the latest CWDP Wi-Fi Design exam questions added this week. Our preparation tool is more than just a CWNP study aid; it's a strategic advantage.
Our free CWDP Wi-Fi Design practice questions crafted to reflect the domains and difficulty of the actual exam. The detailed rationales explain the 'why' behind each answer, reinforcing key concepts about CWDP-304. Use this test to pinpoint which areas you need to focus your study on.
What are the deliverables to your customer after successfully implementing a WLAN infrastructure?
Prior to meeting with the customer for the first time, you should do which of the following?
Response:
Which type of building material causes the most attenuation of Wi-Fi signals'?
ABC Company has a WLAN controller with 10 controller-based APs; the Voice SSID is configured for centralized data forwarding. Each AP is
connected to an access port on a layer-2 Ethernet switch. Each layer-2 switch is uplinked to a single layer-3 core Ethernet switch. The WLAN
controller is connected directly to the layer-3 core Ethernet switch. Layer-3 tunnels are created between all controller-based APs and the WLAN
controller. A voice server is connected to the layer-3
Ethernet switch.
When a voice-enabled QoS STA sends an IP data packet to a voice server in this scenario, the DSCP value carried in the STA's IP data packet gets
mapped to what and by which device?
What advantage provided by 802.11n and 802.11ac is not usable in 1X1:1 low-end client devices?
You have determined the best mounting locations for APs in a given installation. The facilities manager has asked you to change the locations for
several APs due to aesthetic concerns. You suggest mounting the APs in the ideal locations and painting them so they go unnoticed in the
environment.
What is a valid recommendation or consideration when painting APs?
Given: As the wireless network administrator for XYZ Company, you are planning to upgrade your aging wireless network infrastructure, as well as
some clients, to support 802.11ac. In your research, you have discovered that your new wireless client devices and infrastructure are 802.11ac,
WMM, and WMM-PS certified by the Wi-Fi Alliance. Some of your existing client devices are 802.11a/b/g devices that do not support WMM.
Given this information, what scenario is possible when your company's employees begin using both types of client devices on the new WLAN?
What is the minimum PoE budget needed on a switch to support 6 (six) APs that can only be powered using IEEE 802.3at if no other details are
provided?
You desire to achieve a 450 Mbps MCS. What 802.11n features (from the numbered list below) are required?
1. Frame aggregation
2. Short GI
3. 40 MHz channels
4. 2 spatial streams
5. 3 spatial streams
6. Transmit beamforming (TxBF)
A company wants to connect its headquarters to its remote office that is 13 kilometers away using a wireless bridge. What requirement must not
be forgotten by their Wireless Engineer when considering the Fresnel Zone?
