CWDP-304 Practice Questions
Certified Wireless Design Professional
Last Update 4 days ago
Total Questions : 281
Dive into our fully updated and stable CWDP-304 practice test platform, featuring all the latest CWDP Wi-Fi Design exam questions added this week. Our preparation tool is more than just a CWNP study aid; it's a strategic advantage.
Our free CWDP Wi-Fi Design practice questions crafted to reflect the domains and difficulty of the actual exam. The detailed rationales explain the 'why' behind each answer, reinforcing key concepts about CWDP-304. Use this test to pinpoint which areas you need to focus your study on.
You performed a site survey with two USB Wi-Fi adapters using a special driver written for the site survey software. After deployment, you realized
that the client devices used by your customer are getting lower RSSI values than that shown during your site survey. What is the most likely reason
for this result?
What should always be done before connecting an AP to the production network?
Response:
As an implementation engineer, you have just received initial design specs from a network designer for your dual-band 802.11n deployment. The
network design documents prescribe the following data rate configuration for the 2.4 GHz radio:
Basic Rates 5.5, 6, 11, 12 Mbps
Supported Rates 9, 18, 24, 36, 48, and 54 Mbps as well as MCS 0-15
What will result from this design strategy?
A signal passes through a 10-meter cable, an amplifier, and then a filter. The amplifier has an output that is eight times higher in power than its input. Each meter of cable reduces the signal level by a factor of 4. The filter has a loss of 5 d
B.
What is the total loss/gain of the three elements in series?
Response:
While performing a validation site survey, you realize that overlapping channels are being used on the 2.4 GHz bad due to the automatic channel assignment algorithm of the WLAN infrastructure.
What should you do to prevent this?
Response:
What limitation exists when WMM is not enabled on an 802.11n WLAN?
Response:
What kind of antenna results in a nearly circular pattern on the azimuth chart but a very flat donut shape on the elevation chart?
In your company’s WLAN, you expect to have a mixed client PHY environment and plan to use protection mechanisms. The protection mechanism used by your client devices is configurable.
What is the best protection mechanism for backward compatibility of 802.11n devices with 802.11b devices?
Response:
During your first pre-deployment meeting with the deployment team, you hand out the full design documentation to all of them. What's your
primary goal during this meeting?
