HPE0-S59 Practice Questions

A.  

HPE VM Essentials calls vVols " Directory Pools, " and three are automatically established on every cluster.

B.  

The customer can integrate HPE VM Essentials with HPE Alletra Storage MP B10000 to achieve a similar feature.

C.  

Every GFS2 datastore established for HPE VM Essentials is comparable to a Wol.

D.  

The customer can set up the HPE VM Essentials cluster as an HCI (Ceph) cluster to achieve this capability.

A.  

The master modules are located in the interconnect bays 2 and 5

B.  

For the given downlink speed, the maximum number of frames is reached

C.  

Both master modules are located in the same HPE Synergy frame

D.  

To use interconnect bay set 3, all compute nodes must be half-height

A.  

Admins must prestage the ISO OS installation file in the servers ' iLO Repository.

B.  

Admins must ensure that the servers do not have any security risks found on them.

C.  

Admins must obtain or create an Image that is set up for unintended, or automated, installation.

D.  

Admins must install HPE iSUT on the servers using iLO Intelligent Provisioning.

A.  

Whether the customer plans to use the simplified activation key onboarding process

B.  

Which series the HPE ProLiant servers are (such as 100, 300, or 500)

C.  

Which iLO license (Advanced or Standard) the servers have

D.  

Whether the customer plans to use HPE Compute Ops Management only to monitor the servers or also to manage their iLO and BIOS settings

A.  

Brocade 32GB Fibre Channel Switch Module for HPE Synergy

B.  

HPE virtual Connect SE 32 Gb FC Module for Synergy

C.  

HPE Virtual Connect SE 100 Gb F32 Module tor Synergy

D.  

HPE Synergy 12 Gb SAS Connection Module

A.  

When a customer needs the ability to create a network dedicated to a single compute node.

B.  

When a customer needs additional network security by limiting traffic flow for the given network.

C.  

When a customer needs a heartbeat network between two compute nodes for building a cluster.

D.  

When a customer needs each port associated with a given uplink set to be 100Gb/s.

A.  

Each compute node will need a capacity-based license that covers a specific amount of memory, CPUs, and storage.

B.  

A maximum of five compute nodes per HPE SimpliVity cluster can be added, with no more than 32 sockets in total.

C.  

The number of compute nodes that can be added depends on the number and type of HPE SimpliVity nodes.

D.  

If a stretched cluster is implemented, an extension must be applied before compute nodes can be added.

A.  

HPE Superdome Flex must be in memory mode to support HPE Persistent Memory.

B.  

HPE Superdome Flex 280 can be managed using iLO5 management processor.

C.  

HPE Superdome Flex requires Rack Management Controller to support multiple nPars.

D.  

HPE Superdome Flex 280 can scale up to 16 sockets and 24TB of memory.

A.  

It cannot be mixed with Gen9 compute modules in the same frame.

B.  

It supports 8 memory channels and memory DIMMs of up to 256G

B.  

C.  

It only supports NVDIMM Persistent Memory.

D.  

It supports " 3rd Gen AMO EPYC Server Processors with 64 cores.

A.  

HPE ProLiant DL580 Gen10

B.  

HPE ProLiant OL380 Gen 10 Plus

C.  

HPE Synergy 480 Gen10 Plus

D.  

HPE Superdome Flex system