350-501 Practice Questions

A network engineer is configuring RIP as the routing protocol between multiple PEs and CEs. The engineer must avoid advertising the same routes back to their sources. Which action should be performed on the routers to accomplish this task?

Refer to the exhibit. ISP_A is a Tier-1 ISP that provides private Layer 2 and Layer 3 VPN services across the globe using an MPLS-enabled backbone network. Routers R1, R2, R13, and R14 are PE devices. ASRs R3 and R4 and ASBRs R11 and R12 are acting as route reflectors with preconfigured next-hop-self for all BGP neighbors. After the network experienced IGP RIB overflow with multiple routes, a network engineer is working on a more scalable network design to minimize the impact on local RIBs. The solution should be based on RFC 3107 and maintain existing QoS capabilities.

Which task must the engineer perform to achieve the goal?

An engineer is implementing IGMP with SSM on a multicampus network that supports video streaming. Which task must the engineer perform as part of the process?

Refer to the exhibit. An engineer must Implement a traceroute operation to verity the R1 point-to-multipoint LSP connections. The traceroute operation must return all labels and hop-by-hop IP addresses for destinations 10.20.0.1. 10.30.0.1, and 10.40.0.1. and the maximum number of hops is 4. Which command must be executed to meet the requirements?

Refer to the exhibit:

What does this value mean when it is received in XML?

An engineer must apply an 802.1ad-compliant configuration to a new switchport with these requirements:

The switchport must tag all traffic when it enters the port.

The switchport is expected to provide the same level of service to traffic from any customer VLAN.

Which configuration must the engineer use?

An engineer is developing a configuration script to enable dial-out telemetry streams using gRPC on several new devices. TLS must be disabled on the devices. Which configuration must the engineer apply on the network?

A)

B)

C)

D)

Refer to the exhibit.

Router 1 is missing the route for the router 2 loopback 0. What should the engineer change to fix the problem?

Refer to the exhibit. A regional company is implementing a network-health monitoring solution on their Cisco ISR routers to monitor network performance metrics and gather real-time data. The router R1 Ethernet interface, GigabitEthernet0/0, is assigned IP address 192.168.1.1/24, and basic IP addressing and connectivity to the data-collection server have already been configured. A network engineer must update R1 to ensure secure and reliable data transmission to the monitoring server, which is located at IP address 192.168.50.50 on port 50051. To achieve secure communication, the configuration must comply with RFC 5246, and to ensure reliable data transmission, it must follow RFC 793. Which command must the engineer execute to configure data collection?

Drag and drop the functions from the left onto the Path Computation Element Protocol roles on the right.

An engineer is moving all of an organization’s Cisco IOS XE BGP routers to the address-family identifier format. Which command should be used to perform this upgrade quickly with the minimum service disruption?

Refer to the exhibit.

A network engineer notices that router R2 is failing to install network 172.16.33.1/32 in the routing table. Which configuration must the engineer apply to R2 to fix the problem?

Which service is a VNF role?

What is an enhancement that Cisco IOS XE Software has over Cisco IOS Software?

Drag and drop the descriptions from the left onto the corresponding OS types on the right.