LEED-Green-Associate Practice Questions

A.  

ASHRAE 90.1

B.  

California ' s Title 24

C.  

Green Buying Council

D.  

Forest Stewardship Council

A.  

Can evaporate at normal indoor temperatures and pressures

B.  

Need high pressures and high temperatures to evaporate

C.  

Come directly only from the earth’s soil

D.  

Are always harmless in occupied buildings

A.  

Toilets

B.  

Urinals

C.  

Sprinklers

D.  

Lavatory faucets

A.  

Environmental Product Declaration

B.  

Sustainable Sites planning

C.  

Life-cycle assessment

D.  

Life-cycle costing

A.  

A neighborhood that includes a diversity of use

B.  

An area with a decreased building-height-to-street-width ratio

C.  

A development that uses many culs-de-sac in the street design

D.  

A project in an area designed with streets to facilitate increased speed limits

A.  

Graywater includes storm water and potable water, whereas blackwater Includes stormwater and Irrigation

B.  

Graywater may be used for irrigation or drinking, but blackwater should only be used as a source of process water

C.  

Graywater includes wastewater from lavatory faucets, whereas blackwater includes waste water from toilets and urinals

D.  

Graywater is approved for human consumption and may be supplied from wells or municipal water systems, whereas blackwater is comprised of wastewater from toilets and urinals

A.  

Deep cleaning all surfaces during occupant move-in

B.  

Keeping material containers open during construction

C.  

Specifying and installing low-emitting materials at the source

D.  

Keeping doors and windows open after installation of interior finishes

A.  

To promote a worldwide certification standard only for industrial buildings

B.  

To provide a framework for healthy, efficient, and cost-saving green buildings

C.  

To establish a set of financial incentives for building green

D.  

To replace all local building codes and zoning ordinances

A.  

an increase in profits for the developer

B.  

an increase in traffic on adjacent roads

C.  

an increase in installation of rooftop solar

D.  

an increase in the fees for customer parking

A.  

burn paper and cardboard materials on-site

B.  

use contractor vehicles to disperse waste materials to multiple disposal sites within the project region

C.  

follow requirements for using dimensional construction materials, prefabrication or material efficient framing

D.  

take advantage of municipal waste pick-up to reduce the weight of the project ' s construction material scraps