Labour Day Limited Time 60% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: 2493360325

Good News !!! CWDP-303 Certified Wireless Design Professional is now Stable and With Pass Result

CWDP-303 Practice Exam Questions and Answers

Certified Wireless Design Professional

Last Update 13 hours ago
Total Questions : 60

CWDP-303 is stable now with all latest exam questions are added 13 hours ago. Just download our Full package and start your journey with CWNP Certified Wireless Design Professional certification. All these CWNP CWDP-303 practice exam questions are real and verified by our Experts in the related industry fields.

CWDP-303 PDF

CWDP-303 PDF (Printable)
$48
$119.99

CWDP-303 Testing Engine

CWDP-303 PDF (Printable)
$56
$139.99

CWDP-303 PDF + Testing Engine

CWDP-303 PDF (Printable)
$70.8
$176.99
Question # 1

Why should band steering algorithms allow stations to connect to the 2.4 GHz band after some number of ignored Probe Requests?

Options:

A.  

Because the FCC requires it.

B.  

Because some clients are persistent clients that will not move on to the 5 GHz band.

C.  

Because the 802.11 standard requires it.

D.  

Because the AP will experience a buffer overflow if they do not eventually respond with a Probe Response.

Discussion 0
Question # 2

During an RFP analysis, one of the vendors mentioned that you’ll need to upgrade your Gigabit Ethernet switches to MultiGig switches to ensure support for 802.11ac and 802.11ax, which both offer data rates over 1Gbps. Why is this not sound advice?

Options:

A.  

Because neither of the technologies support data rates over 1Gbps

B.  

Because 802.11ax doesn’t support channel bonding

C.  

Management overhead that is normal in WLANs will reduce the throughput of the client devices

D.  

Because 802.11ac only supports one spatial stream

Discussion 0
Question # 3

What is the most cost-effective way to accurately measure the height of a ceiling when ladder use is not allowed?

Options:

A.  

Estimate the height based on known object sizes

B.  

Gather measurements from other objects and do the math

C.  

Rent a lift-cart to lift you up to the ceiling

D.  

Use a laser measure to measure the distance from the floor to the ceiling

Discussion 0
Question # 4

While performing a validation site survey, you realize that overlapping channels are being used on the 2.4 GHz bad due to the automatic channel assignment algorithm of the WLAN infrastructure. What should you do to prevent this?

Options:

A.  

Reconfigure the automatic channel assignment settings to use only channels 1, 6, and 11

B.  

Purchase and deploy new APs from a different vendor

C.  

Reconfigure the network to use static channel plans because automatic channel assignment algorithms are all broken

D.  

Leave it as it is; sometimes using all 11 channels in 2.4 GHz gives the optimum performance result

Discussion 0
Question # 5

You are conducting a physical site survey where heavy machinery is repaired. What is a common item required specifically for this type of survey?

Options:

A.  

Personal Protective Equipment (PPE)

B.  

Low gain antennas

C.  

Low power APs

D.  

Indoor APs

Discussion 0
Question # 6

Your customer’s 802.11n laptops are not able to see the SSID in the 5 GHz band in the conference room. When doing a walkthrough using one of these laptops, you confirm that it is unable to see the SSID in the 5 GHz band in the conference room. When using your own 802.11 ac laptop, you’re able to see the SSI

D.  

What is the most likely cause of this problem?

Options:

A.  

The AP is configured to use channel 36

B.  

The customer laptop does not support Transmit Beamforming

C.  

The AP is on channel 144

D.  

Their laptops are SISO clients

Discussion 0
Question # 7

Switches and APs have already been chosen by your customer. All switches support 802.3bz MultiGig interfaces and APs are 4x4:4 802.11ac wave 2 capable of using dual-5GHz and have one MultiGig interface. Some cable drops for the APs will run for more than 180.5 feet (or 55 meters). To support MultiGig, what is the best choice of cabling?

Options:

A.  

Cat-5

B.  

Cat-6

C.  

Cat-5e

D.  

Cat-6a

Discussion 0
Question # 8

In addition to a copy of your design, which tools should you use to ensure the installation team deploys APs where you have them designed to be located?

Options:

A.  

GPS and a map

B.  

RF spectrum analyzer and packet capturing software

C.  

Ladder and a pen

D.  

Camera and marking tools

Discussion 0
Question # 9

During lunch time in the break room of a company, Wi-Fi connectivity on the 2.4 GHz band is intermittent. Every other time of the day, it works fine. What’s the likely cause of this issue?

Options:

A.  

Employees are using their cell data instead of using the Wi-Fi

B.  

The AP in the cafeteria keeps rebooting due to lack of PoE budget on the switch

C.  

Toasters and ovens are heating up the air, raising the noise floor with the Wi-Fi on the 2.4 Ghz band

D.  

Microwaves in the cafeteria are interfering with the Wi-Fi on the 2.4 GHz band

Discussion 0
Get CWDP-303 dumps and pass your exam in 24 hours!

Free Exams Sample Questions